Getting started, only having pulse meter

Tags: #<Tag:0x00007f6e013a4848>

As I have 3 phase electricity in my house I want to only record pulses so I can see daily kwh usage, I don’t really need to see the current usage, I already got my emonpi and connected it but I’m not sure how to set it up to be able to see the kwh usage from the pulse meter, any one that can point me in the right direction as to what I have to configure

Hi welcome

Hopefully you have looked through the guide. The specific section is…

You can create a kWh feed by adding additional processes to multiply by 0.001 and then pass to the kWhaccumulator process.