# Enphase Envoy integration in Emoncms

**URL:** <https://community.openenergymonitor.org/t/enphase-envoy-integration-in-emoncms/3999>\
**Category:** Integrations\
**Tags:** emonpi, emoncms\
**Created:** [14 May 2017 19:16 UTC](https://community.openenergymonitor.org/t/enphase-envoy-integration-in-emoncms/3999 "2017-05-14T19:16:01Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Edwin](https://community.openenergymonitor.org/letter_avatar_proxy/v4/letter/e/73ab20/32.png) [@Edwin](https://community.openenergymonitor.org/u/Edwin)\
**Post date:** [14 May 2017 19:16 UTC](https://community.openenergymonitor.org/t/enphase-envoy-integration-in-emoncms/3999/1 "2017-05-14T19:16:01Z")

</div>

Hi all,

For those user who would like Enphase envoy integration in emoncms I developed some scripts to readout the envoy monitor. The code has been developed to make use of the local envoy instance and does not make any use of the enlighten web application.

The scripts are written in python and can be found on Github. Please follow the readme.md instructions for installation.

Sources can be downloaded at: [GitHub - EdwinBontenbal/Envoy2Emoncms](https://github.com/EdwinBontenbal/Envoy2Emoncms)

Have fun!

Edwin Bontenbal

---

<div class="post-metadata">

**Author:** ![peter](https://community.openenergymonitor.org/user_avatar/community.openenergymonitor.org/peter/32/2749_2.png) [@peter](https://community.openenergymonitor.org/u/peter)\
**Post date:** [15 May 2017 11:01 UTC](https://community.openenergymonitor.org/t/enphase-envoy-integration-in-emoncms/3999/2 "2017-05-15T11:01:40Z")

</div>

Just an FYI - from what I have read out there, only the Envoy-S with firmware 4.x.x supports access to the inverter data with the username envoy and password of the last 6 digits of serial number. Older units, non -S ones, don’t give up that easily.