Is this what you are seeing every 10 s:
0.00 0.000 0.000 0.000 0.000 0.00 0.00 0.00 0.00 0.000 0.0000 0.0000 0.0000 0.0000 302.00 Pulses=0 PLL is locked
The only reason that I can think of, is your input pin mappings must be very wrong, or you’ve somehow got zeros for your calibration constants.
Have you tried wiping the EEPROM to reset to the sketch default values?
(Page 8: On-line calibration & configuration of RF Module)
I can’t think of anything else that would give zeros for all the values.
