# emonTx Node Communicates to one RFM69Pi, but not another

**URL:** <https://community.openenergymonitor.org/t/emontx-node-communicates-to-one-rfm69pi-but-not-another/7771>\
**Category:** RFM69Pi\
**Created:** [28 June 2018 20:58 UTC](https://community.openenergymonitor.org/t/emontx-node-communicates-to-one-rfm69pi-but-not-another/7771 "2018-06-28T20:58:01Z")\
**Posts on this page:** 1\
**Showing post:** 17

<div class="post-metadata">

**Author:** ![brandock](https://community.openenergymonitor.org/letter_avatar_proxy/v4/letter/b/5e9695/32.png) [@brandock](https://community.openenergymonitor.org/u/brandock)\
**Post date:** [30 June 2018 21:19 UTC](https://community.openenergymonitor.org/t/emontx-node-communicates-to-one-rfm69pi-but-not-another/7771/17 "2018-06-30T21:19:59Z")

</div>

> [@pb66](#):
>
> Do you mean this repo?

No. After reading [this](https://community.openenergymonitor.org/t/recompiling-rfm69pi-firmware/2618/5) post I realized I should look for an OEM-specific jeelib library.

I went to GitHub \> Open Energy Monitor \> jeelib and found this repository, which is the one that worked.

> **[GitHub - openenergymonitor/jeelib: JeeLib for Arduino IDE: Ports, RF12, and...](https://github.com/openenergymonitor/jeelib)**
>
> JeeLib for Arduino IDE: Ports, RF12, and RF69 drivers from JeeLabs - GitHub - openenergymonitor/jeelib: JeeLib for Arduino IDE: Ports, RF12, and RF69 drivers from JeeLabs

---

_[View the full topic](https://community.openenergymonitor.org/t/emontx-node-communicates-to-one-rfm69pi-but-not-another/7771)._