# EmonTx and raspberry (advice needed!)

**URL:** <https://community.openenergymonitor.org/t/emontx-and-raspberry-advice-needed/8414>\
**Category:** emonTx\
**Tags:** raspberrypi3, emontx\
**Created:** [1 September 2018 10:09 UTC](https://community.openenergymonitor.org/t/emontx-and-raspberry-advice-needed/8414 "2018-09-01T10:09:50Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![Robert.Wall](https://community.openenergymonitor.org/user_avatar/community.openenergymonitor.org/robert.wall/32/38246_2.png) [@Robert.Wall](https://community.openenergymonitor.org/u/Robert.Wall)\
**Post date:** [1 September 2018 11:45 UTC](https://community.openenergymonitor.org/t/emontx-and-raspberry-advice-needed/8414/2 "2018-09-01T11:45:45Z")

</div>

Try this:

> [@Using the EmonTx v3 with the ESP8266 Huzzah WIFI module](https://community.openenergymonitor.org/t/using-the-emontx-v3-with-the-esp8266-huzzah-wifi-module/795):
>
> Following on from the forum post here [ESP8266 Wifi Developments](https://community.openenergymonitor.org/t/esp8266-wifi-developments/784). This is a brief guide on how to use the Adafruit ESP8266 Huzzah WIFI breakout module with an EmonTx v3 to make a simple WIFI enabled energy monitor that posts to a remote emoncms server such as [emoncms.org](http://emoncms.org). Note: this is an ongoing development project, but is a useful option in its present form In the future, we may integrate the ESP8266 module directly on the EmonTx PCB. For now, the ESP8266 Huzzah module provides a go…

---

_[View the full topic](https://community.openenergymonitor.org/t/emontx-and-raspberry-advice-needed/8414)._