# emonTH antenna placement

**URL:** <https://community.openenergymonitor.org/t/emonth-antenna-placement/5533>\
**Category:** emonTH\
**Created:** [1 November 2017 17:29 UTC](https://community.openenergymonitor.org/t/emonth-antenna-placement/5533 "2017-11-01T17:29:16Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![bwduncan](https://community.openenergymonitor.org/letter_avatar_proxy/v4/letter/b/d78d45/32.png) [@bwduncan](https://community.openenergymonitor.org/u/bwduncan)\
**Post date:** [1 November 2017 17:29 UTC](https://community.openenergymonitor.org/t/emonth-antenna-placement/5533/1 "2017-11-01T17:29:16Z")

</div>

Hi folks,

I’m sure this has been mentioned before, but just in case I wanted to share that I get a much better rssi if I uncoil the antenna from my emonTHv2 and stick it out of the case. This is the effect on rssi:

 ![Screenshot_20171025-225021](https://community.openenergymonitor.org/uploads/default/original/2X/f/fd771e366d8cce2ab9032ede50866ca31eca5fc7.png)

Looking at a month of data, I would say rssi has increased from -85 to -55, roughly.

The number of missed packets reduced, but it’s harder to see that on the graphs.

Hope that helps someone,  
Bruce
