# emonSD next steps

**URL:** <https://community.openenergymonitor.org/t/emonsd-next-steps/10426>\
**Category:** emonSD\
**Created:** [18 March 2019 15:12 UTC](https://community.openenergymonitor.org/t/emonsd-next-steps/10426 "2019-03-18T15:12:03Z")\
**Posts on this page:** 1\
**Showing post:** 115

<div class="post-metadata">

**Author:** ![borpin](https://community.openenergymonitor.org/user_avatar/community.openenergymonitor.org/borpin/32/193_2.png) [@borpin](https://community.openenergymonitor.org/u/borpin)\
**Post date:** [25 April 2019 20:53 UTC](https://community.openenergymonitor.org/t/emonsd-next-steps/10426/115 "2019-04-25T20:53:49Z")

</div>

> [@TrystanLea](#):
>
> The installation on a stock raspbian stretch image can be started with:

> [@emonSD next steps: filesystem & logrotate](https://community.openenergymonitor.org/t/emonsd-next-steps-filesystem-logrotate/10693/146):
>
> My draft readme for the install process is available in the folder here:

I’m not sure if you are using the latest Raspbian Lite image, but the readme for expanding the file system does not seem to match this image after first boot. I suspect the file system has already been expanded.

```auto
Disk /dev/mmcblk0: 14.5 GiB, 15552479232 bytes, 30375936 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x8b1df36f

Device Boot Start End Sectors Size Id Type
/dev/mmcblk0p1 8192 96042 87851 42.9M c W95 FAT32 (LBA)
/dev/mmcblk0p2 98304 30375935 30277632 14.4G 83 Linux

```

Trying to run the install and I fell at the first hurdle.

[edit] decided to run it anyway. Ran fine until here where it wanted some input.

> <https://github.com/openenergymonitor/emonpi/blob/cf7cac6bff569d7aa96ac57c1722824d37c1df6c/install/emonsd.sh#L13-L13>

```auto
rm: remove write-protected regular file 'log2ram/.git/objects/pack/pack-e60fc815bb6beda9136261e26e2b90e3e9bc867e.pack'?

```

Other than that seems to work 😄. Did an export/import - all OK.

---

_[View the full topic](https://community.openenergymonitor.org/t/emonsd-next-steps/10426)._