# Emonhub: inactive dead **URL:** \ **Category:** emonHub\ **Created:** [27 March 2021 12:29 UTC](https://community.openenergymonitor.org/t/emonhub-inactive-dead/17344 "2021-03-27T12:29:10Z")\ **Posts on this page:** 1\ **Showing post:** 9
**Author:** ![m2ts](https://community.openenergymonitor.org/letter_avatar_proxy/v4/letter/m/7cd45c/32.png) [@m2ts](https://community.openenergymonitor.org/u/m2ts)\ **Post date:** [31 March 2021 04:20 UTC](https://community.openenergymonitor.org/t/emonhub-inactive-dead/17344/9 "2021-03-31T04:20:28Z")
Yes, I did check syslog and I removed the [[RFM2Pi]]-interfacer completely from `/etc/emonhub/emonhub.conf`. But to no reveal. Your last suggestion was to git clone to… and that’s why I started from scratch again. In that way I was sure that I could do a clean install again. So, at the moment I didn’t do a emonhub install, as I wondered if my posted install steps are ok. Does my working directory need to be `/opt/openenergymonitor/emonhub/` (I don’t think it matters, but I’m not sure)? Last time I did the git clone command from my $HOME. I also found the topic ‘[Installing Emonhub on a PC](https://community.openenergymonitor.org/t/installing-emonhub-on-a-pc/11527)’ where @thierry could install emonhub on a pc after some tweaking. Unfortunately the tweaking itself isn’t mentioned. --- _[View the full topic](https://community.openenergymonitor.org/t/emonhub-inactive-dead/17344)._