Emonhub.conf Issue after emonpi update

Jon · 2016-05-19T03:38:17.772Z

I clicked the Update Now button (Setup > Administration > Update emonPi > Update Now) and after the emonPi completed the update, its power, VRMS, etc. values stopped updating.

I found an error in the emonhub.log - something was parsed incorrectly and the problem was in line 191 (sorry no image). I found a [[11]] that was in need of a line feed or two.

Screen Shot 2016-05-18 at 9.53.48 PM.png1517×480 67.3 KB

After I added the line feed I had to do a sudo reboot the get things running again.

Release - emonSD-03May16
Update run on 19 May 2016 at 02:49:38 UTC

marcneelen · 2016-05-19T05:37:18.219Z

Thanks for sharing. I ran the update yesterday too, and equally experienced inputs stopped updating. This now solved the mystery, all ok again!

Marc

glyn.hudson · 2016-05-19T23:05:41.409Z

Thanks for letting me know, just pushed a fix: fix new line before append rather than after · openenergymonitor/emonhub@96cd3f2 · GitHub

Update should now add node 11 with a space before. Pleae confirm this works for you.

Jon · 2016-05-20T02:12:31.755Z

Confirmed. Ran the emonpi update and it works as expected! Thank you!