Hi All, I’ve finally jumped on the emoncms band wagon and couldn’t be happier. My friend has been using the energymonitor for years with great results. I’ve got everything working but the emonglcd. I’ve uploaded the following firmware: EmonGLCD/HomeEnergyMonitor.ino at master · openenergymonitor/…

Yes, the GLCD is all but obsolete (regrettably, but I understand why), and the default node ID’s have changed around since. You need to tell your emonHub to send the time. Look in the config. file and you should see: [[RFM2Pi] … [[[runtimesettings]]] … # interval = …

EmonGLCD not updating

Hardware

Robert.Wall (Robert Wall) Split this topic 28 June 2018 20:57 13

2 posts were split to a new topic: Sending emonPi power data to an emonGLCD

Sending emonPi power data to an emonGLCD