# EmonESP - 9600

**URL:** <https://community.openenergymonitor.org/t/emonesp-9600/16290>\
**Category:** WiFi Relay\
**Created:** [20 December 2020 05:24 UTC](https://community.openenergymonitor.org/t/emonesp-9600/16290 "2020-12-20T05:24:00Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![garrys](https://community.openenergymonitor.org/user_avatar/community.openenergymonitor.org/garrys/32/16047_2.png) [@garrys](https://community.openenergymonitor.org/u/garrys)\
**Post date:** [20 December 2020 05:24 UTC](https://community.openenergymonitor.org/t/emonesp-9600/16290/1 "2020-12-20T05:24:00Z")

</div>

Does anybody have a recent compile of the EmonESP (firmware.bin) with the serial speed set at 9600. ?

---

<div class="post-metadata">

**Author:** ![Robert.Wall](https://community.openenergymonitor.org/user_avatar/community.openenergymonitor.org/robert.wall/32/38246_2.png) [@Robert.Wall](https://community.openenergymonitor.org/u/Robert.Wall)\
**Post date:** [20 December 2020 11:47 UTC](https://community.openenergymonitor.org/t/emonesp-9600/16290/2 "2020-12-20T11:47:02Z")

</div>

Welcome, Garry to the OEM Forum.

It has been published here. You needed to search for ESP8266 9600 baud.

> [@3-phase in Austria](https://community.openenergymonitor.org/t/3-phase-in-austria/11389/31):
>
> @glyn.hudson has created a compiled version of the emonESP firmware for you: [https://community.openenergymonitor.org/uploads/short-url/zegtvp5lICQT1w6J7ZoTXRnsiw3.bin](https://community.openenergymonitor.org/uploads/short-url/zegtvp5lICQT1w6J7ZoTXRnsiw3.bin) You can load this into your emonESP and hopefully this will solve your problem.

EmonESP special sketch (9600 baud) for use with 3-phase PLL sketch:  
[https://community.openenergymonitor.org/uploads/short-url/zegtvp5lICQT1w6J7ZoTXRnsiw3.bin](https://community.openenergymonitor.org/uploads/short-url/zegtvp5lICQT1w6J7ZoTXRnsiw3.bin)

---

<div class="post-metadata">

**Author:** ![garrys](https://community.openenergymonitor.org/user_avatar/community.openenergymonitor.org/garrys/32/16047_2.png) [@garrys](https://community.openenergymonitor.org/u/garrys)\
**Post date:** [20 December 2020 20:51 UTC](https://community.openenergymonitor.org/t/emonesp-9600/16290/3 "2020-12-20T20:51:28Z")

</div>

Robert,

Thank you for replying to my query.  
I did indeed find that compiled version, but for some reason it would not work for me. I could see the AP being listed and I could connect with it, but I could not access the webpage 192.168.4.1, kept timing out.  
Anyway I have managed to install PlatformIO and compile the version I require. wifirelay with baud rate 9600. I can now access the webpage … Just need to find time to test the 9600 comms link…  
Thanks again…stay safe …

---

<div class="post-metadata">

**Author:** ![Robert.Wall](https://community.openenergymonitor.org/user_avatar/community.openenergymonitor.org/robert.wall/32/38246_2.png) [@Robert.Wall](https://community.openenergymonitor.org/u/Robert.Wall)\
**Post date:** [20 December 2020 21:07 UTC](https://community.openenergymonitor.org/t/emonesp-9600/16290/4 "2020-12-20T21:07:15Z")

</div>

> [@garrys](#):
>
> Anyway I have managed to install PlatformIO

I’m afraid I can’t help with that - when I installed it, it moved files and destroyed my system, so I’m not risking that again. And unfortunately, I don’t have an ESP8266 so I can’t help with that either.

But as it was @glyn.hudson who produced that compiled version, I would assume that it should work. Maybe he can shed some light on why it wouldn’t work for you?

---

<div class="post-metadata">

**Author:** ![TrystanLea](https://community.openenergymonitor.org/user_avatar/community.openenergymonitor.org/trystanlea/32/31_2.png) [@TrystanLea](https://community.openenergymonitor.org/u/TrystanLea)\
**Post date:** [21 December 2020 21:15 UTC](https://community.openenergymonitor.org/t/emonesp-9600/16290/5 "2020-12-21T21:15:56Z")

</div>

Hello @garrys here it is compiled with the baud set to 9600, this is the latest version, master branch  
[firmware.zip](https://community.openenergymonitor.org/uploads/short-url/wESuqZQhdMrXbx6KcLxl08yoTnS.zip) (512.9 KB)

Noticed you have this tagged under WiFi Relay, here’s the same but compiled for the WiFi Relay pinout [firmware-wifirelay.zip](https://community.openenergymonitor.org/uploads/short-url/fQNExva1Lrz0TdHKiU0ys3vbEWM.zip) (487.6 KB)