# Emoncms Remote Configuration ( own server )

**URL:** <https://community.openenergymonitor.org/t/emoncms-remote-configuration-own-server/1710>\
**Category:** Installation\
**Created:** [27 September 2016 17:18 UTC](https://community.openenergymonitor.org/t/emoncms-remote-configuration-own-server/1710 "2016-09-27T17:18:32Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![delphsoft](https://community.openenergymonitor.org/letter_avatar_proxy/v4/letter/d/76d3ee/32.png) [@delphsoft](https://community.openenergymonitor.org/u/delphsoft)\
**Post date:** [27 September 2016 17:18 UTC](https://community.openenergymonitor.org/t/emoncms-remote-configuration-own-server/1710/1 "2016-09-27T17:18:32Z")

</div>

Following the topic

> [@Emoncms running on own Server](https://community.openenergymonitor.org/t/emoncms-running-on-own-server/1648):
>
> Following the guides in Openenergy monitor , i ready installed Emoncms in my own Server But i cant get data from my local emoncms ( emonpi ) and appear some nodes that i never config before with some data on it the feeds stuck on getting data Config in Emoncms

i would like to solve the issue about getting feeds config on my emoncms remote server

Following the instructions i ready set up a emoncms server  
inputs are getting data , but when i try to set up feeds for inputs , its stuck on wait message  
if this could be a protocol or receiving data issue , the inputs are not receiving any data too , but its getting values from my emonpi

 ![](https://community.openenergymonitor.org/uploads/default/original/2X/9/9be8330464e28c02ac34aafbd4f969d7a4130750.png) ![](https://community.openenergymonitor.org/uploads/default/original/2X/1/15a8261c005430c461cca167d1b51c01f2847531.png)

---

<div class="post-metadata">

**Author:** ![pb66](https://community.openenergymonitor.org/user_avatar/community.openenergymonitor.org/pb66/32/27_2.png) [@pb66](https://community.openenergymonitor.org/u/pb66)\
**Post date:** [27 September 2016 17:33 UTC](https://community.openenergymonitor.org/t/emoncms-remote-configuration-own-server/1710/2 "2016-09-27T17:33:41Z")

</div>

A post was merged into an existing topic: [Emoncms running on own Server](https://community.openenergymonitor.org/t/emoncms-running-on-own-server/1648)

---

<div class="post-metadata">

**Author:** ![pb66](https://community.openenergymonitor.org/user_avatar/community.openenergymonitor.org/pb66/32/27_2.png) [@pb66](https://community.openenergymonitor.org/u/pb66)\
**Post date:** [27 September 2016 17:33 UTC](https://community.openenergymonitor.org/t/emoncms-remote-configuration-own-server/1710/3 "2016-09-27T17:33:41Z")

</div>