Emoncms docker container not starting dies continously

borpin · 2022-11-23T07:17:07.670Z

stephen:

Hi there, was wondering when running emoncms docker container.

If this is the Docker on the OEM GitHub, I don’t think it is maintained. @glyn.hudson

There was a thread about Docker instance recently, you might like to search it out.

Docker isn’t something I use at all, so cannot help. Personally, I use PVE & LXC and install EmonCMS using the scripts.

stephen · 2022-11-23T10:56:32.930Z

thank you for the reply . docker not something I used particularly much. and just something I was experimenting with lately . in my effort of build small contained devices within the openwrt opensource router format

stephen · 2022-11-23T11:50:09.514Z

okay I think perhaps I know why it does not work - emoncms is not particularly build for my architecture. arm7 —wondering if they are willing to add in different architectures when building docker container. as it removing alot of different devices the docker container will work with.
example output from openwrt docker “inspector” it reports using arm7 build

{
  "Path": "\/init",
  "ProcessLabel": "",
  "ResolvConfPath": "\/opt\/docker\/containers\/2d9be9e4dcd02bd0296763d95c99034f15d85857932ef44ef70e2a54500b0a8b\/resolv.conf",
  "NetworkSettings": {
    "LinkLocalIPv6Address": "",
    "SandboxID": "bda184456e831dd415f296832e173175814d084f54081510145ca21a39515d4a",
    "HairpinMode": false,
    "Networks": {
      "host": {
        "NetworkID": "a4350309e9511c3e1d234667c898a54bc02d9bbf4029f1d76686b60978b8d07d",
        "IPAddress": "",
        "MacAddress": "",
        "IPPrefixLen": 0,
        "IPv6Gateway": "",
        "Gateway": "",
        "GlobalIPv6PrefixLen": 0,
        "EndpointID": "",
        "GlobalIPv6Address": ""
      }
    },
    "Ports": [
    ],
    "Bridge": "",
    "MacAddress": "",
    "IPv6Gateway": "",
    "IPPrefixLen": 0,
    "IPAddress": "",
    "EndpointID": "",
    "SandboxKey": "\/var\/run\/docker\/netns\/default",
    "Gateway": "",
    "GlobalIPv6PrefixLen": 0,
    "LinkLocalIPv6PrefixLen": 0,
    "GlobalIPv6Address": ""
  },
  "MountLabel": "",
  "HostsPath": "\/opt\/docker\/containers\/2d9be9e4dcd02bd0296763d95c99034f15d85857932ef44ef70e2a54500b0a8b\/hosts",
  "LogPath": "\/opt\/docker\/containers\/2d9be9e4dcd02bd0296763d95c99034f15d85857932ef44ef70e2a54500b0a8b\/2d9be9e4dcd02bd0296763d95c99034f15d85857932ef44ef70e2a54500b0a8b-json.log",
  "RestartCount": 0,
  "Config": {
    "Tty": false,
    "Entrypoint": [
      "\/init"
    ],
    "Labels": {
      "org.opencontainers.image.url": "https:\/\/www.home-assistant.io\/",
      "org.opencontainers.image.version": "2022.11.4",
      "org.opencontainers.image.title": "Home Assistant",
      "io.hass.base.version": "2022.09.0",
      "org.opencontainers.image.licenses": "Apache License 2.0",
      "org.opencontainers.image.description": "Open-source home automation platform running on Python 3",
      "org.opencontainers.image.documentation": "https:\/\/www.home-assistant.io\/docs\/",
      "org.opencontainers.image.authors": "The Home Assistant Authors",
      "org.opencontainers.image.source": "https:\/\/github.com\/home-assistant\/core",
      "io.hass.base.image": "homeassistant\/armv7-base:3.16",
      "io.hass.version": "2022.11.4",
      "io.hass.type": "core",
      "io.hass.base.name": "python",
      "io.hass.arch": "armv7",
      "org.opencontainers.image.created": "2022-11-21 01:15:07+00:00",
      "io.hass.base.arch": "armv7"
    },
    "AttachStdin": false,
    "User": "",
    "WorkingDir": "\/config",
    "AttachStderr": false,
    "OpenStdin": false,
    "Image": "homeassistant\/home-assistant:latest",
    "Hostname": "OpenWrt",
    "Env": [
      "TZ=America\/Winnipeg",
      "PATH=\/usr\/local\/bin:\/usr\/local\/sbin:\/usr\/local\/bin:\/usr\/sbin:\/usr\/bin:\/sbin:\/bin",
      "LANG=C.UTF-8",
      "S6_BEHAVIOUR_IF_STAGE2_FAILS=2",
      "S6_CMD_WAIT_FOR_SERVICES_MAXTIME=0",
      "S6_CMD_WAIT_FOR_SERVICES=1",
      "WHEELS_LINKS=https:\/\/wheels.home-assistant.io\/musllinux\/",
      "S6_SERVICES_GRACETIME=220000"
    ],
    "Domainname": "",
    "AttachStdout": false,
    "StdinOnce": false
  },
  "Mounts": [
    {
      "Type": "bind",
      "Source": "\/root\/hassio",
      "Mode": "",
      "Destination": "\/config",
      "RW": true,
      "Propagation": "rprivate"
    }
  ],
  "Id": "2d9be9e4dcd02bd0296763d95c99034f15d85857932ef44ef70e2a54500b0a8b",
  "Platform": "linux",
  "HostConfig": {
    "CgroupParent": "",
    "MemorySwap": 0,
    "ConsoleSize": [
      0,
      0
    ],
    "IOMaximumIOps": 0,
    "KernelMemoryTCP": 0,
    "CpuPeriod": 0,
    "OomScoreAdj": 0,
    "BlkioWeight": 0,
    "CgroupnsMode": "private",
    "Privileged": false,
    "MaskedPaths": [
      "\/proc\/asound",
      "\/proc\/acpi",
      "\/proc\/kcore",
      "\/proc\/keys",
      "\/proc\/latency_stats",
      "\/proc\/timer_list",
      "\/proc\/timer_stats",
      "\/proc\/sched_debug",
      "\/proc\/scsi",
      "\/sys\/firmware"
    ],
    "CpuShares": 0,
    "NetworkMode": "host",
    "CpuQuota": 0,
    "NanoCpus": 0,
    "CpuCount": 0,
    "Isolation": "",
    "Cgroup": "",
    "ContainerIDFile": "",
    "AutoRemove": false,
    "UTSMode": "",
    "VolumeDriver": "",
    "ReadonlyPaths": [
      "\/proc\/bus",
      "\/proc\/fs",
      "\/proc\/irq",
      "\/proc\/sys",
      "\/proc\/sysrq-trigger"
    ],
    "IOMaximumBandwidth": 0,
    "CpuRealtimePeriod": 0,
    "CpuPercent": 0,
    "KernelMemory": 0,
    "Binds": [
      "\/root\/hassio:\/config"
    ],
    "MemoryReservation": 0,
    "RestartPolicy": {
      "Name": "unless-stopped",
      "MaximumRetryCount": 0
    },
    "PublishAllPorts": false,
    "Runtime": "runc",
    "CpusetMems": "",
    "IpcMode": "private",
    "ReadonlyRootfs": false,
    "UsernsMode": "",
    "Memory": 0,
    "CpusetCpus": "",
    "ShmSize": 67108864,
    "CpuRealtimeRuntime": 0,
    "PidMode": "",
    "LogConfig": {
      "Config": [
      ],
      "Type": "json-file"
    }
  },
  "GraphDriver": {
    "Data": {
      "MergedDir": "\/opt\/docker\/overlay2\/1ccf432a33a51b680bea9326383cfb0643c5eb7772ece422498611152311abde\/merged",
      "WorkDir": "\/opt\/docker\/overlay2\/1ccf432a33a51b680bea9326383cfb0643c5eb7772ece422498611152311abde\/work",
      "UpperDir": "\/opt\/docker\/overlay2\/1ccf432a33a51b680bea9326383cfb0643c5eb7772ece422498611152311abde\/diff",
      "LowerDir": "\/opt\/docker\/overlay2\/1ccf432a33a51b680bea9326383cfb0643c5eb7772ece422498611152311abde-init\/diff:\/opt\/docker\/overlay2\/cf08ce1a08ccbba7d54275c69a33492db650c2a7855944f42ab896be8d8e2786\/diff:\/opt\/docker\/overlay2\/2ddd28bbe94fe33df50462c585101aa40ef2a5196183e3b094530c93eef3d7d9\/diff:\/opt\/docker\/overlay2\/7c37305eea62052146074089dddbefeba56e1f1049254929c540a9d0566992b7\/diff:\/opt\/docker\/overlay2\/74b6232d0b3fe9a9bc14a627a620b75f8eca6ff2154793f64913afb874d094c1\/diff:\/opt\/docker\/overlay2\/d5f20241f1ac9292d8dd8199e9a91780446846908ba49fd280f3a8212569e413\/diff:\/opt\/docker\/overlay2\/3af8507fb899cca966d5b6ba7bed9c4575c6737e856d0814538915eb5c77877d\/diff:\/opt\/docker\/overlay2\/372765ed956963e4abb2b6806b9875b7554575f749f39f584ab35f0a42adaefc\/diff:\/opt\/docker\/overlay2\/39995e64ebc9b6120411648496f4e6a44ee3d083fa623cd2f22b16b850c89f04\/diff:\/opt\/docker\/overlay2\/79879d43f9d81856524c9ca71c062c8627a88661df90272d0100c62b705d8aa1\/diff:\/opt\/docker\/overlay2\/317fd9653a6de0d445a94f751e6b16e487aa97a064b9756b2293cd427acddea2\/diff:\/opt\/docker\/overlay2\/df29812666a9afe0f7448942d032c0577caaef17ac444c4b0a69dad631635c84\/diff:\/opt\/docker\/overlay2\/38928191a4e7da1bf952614fdad9d8abd203469f56e0a67553784821dc58ab9e\/diff:\/opt\/docker\/overlay2\/7c226a2d639a932ed4f2ad57ba7e90ee75105ccc47758b30b3e7de82e7a11a0a\/diff:\/opt\/docker\/overlay2\/9489a54b6f7867e07cf603c5fc9b7807c69c4b1507d0019e45eecf4fc4abb004\/diff:\/opt\/docker\/overlay2\/591080ea9bbf489d3c79d40174db3358455dc1fada8a28bfb018b0b5f46ee385\/diff:\/opt\/docker\/overlay2\/c614941554490f3b9fcac1c6bff611b31929703f0de098fdf84c9c6a48427c47\/diff:\/opt\/docker\/overlay2\/e7078fb96c69037a19f7fc066fd2c6ffdce3cb1951ed689c6b5d08cf0f4e625b\/diff:\/opt\/docker\/overlay2\/8afe162b6b42ec5a41621ebd3fccfccdd8865f9a38258f176286a1e639781593\/diff:\/opt\/docker\/overlay2\/524160da2dd389a9a9ea7888a884b221fcbe8d2f1b4d15b9cb46c7522ddddb4a\/diff:\/opt\/docker\/overlay2\/16bd07d5ca273c91ce19beb93beba340e8ba1f3b95333480e0a444ad9cce1080\/diff:\/opt\/docker\/overlay2\/0ecfa269f30dbb261984d49c64be55bf794811ec28eb646db09fe92cee755913\/diff:\/opt\/docker\/overlay2\/c9913c8dc1190fd5ba61d8453ea33209a8471ea3b7481762043d8f00355d7f57\/diff:\/opt\/docker\/overlay2\/a1c5f8c5dd4f583384b95a662a50917726a97db3b1f0e9de9abfa8c8a7ba396f\/diff:\/opt\/docker\/overlay2\/60e29b0d2ca5bc1fcb72ae4a29591ba7919fe8f93c09637282e43d9ff6d1c069\/diff:\/opt\/docker\/overlay2\/bbdd0853ecf6d0ced8fcca112d397390addaf4455636b22cce5adbd2324be110\/diff:\/opt\/docker\/overlay2\/7e95fddedf7de5a7bb42f2ac0cb53c8d9d5d2f1df6fb70fdf84460b5a61a555d\/diff:\/opt\/docker\/overlay2\/739dd7f7a2cb0decc629a7ee864fe599389782896eddd98342d2931fd7afbda9\/diff:\/opt\/docker\/overlay2\/1a2b95b07d486fbe4894dd9c033caa38ebc2f0d077d76ac2cc733f0d316d2c10\/diff:\/opt\/docker\/overlay2\/9742f37dd462d59ed20fe968ca7b0fec529f06c8852a4a54601897b0ee188234\/diff"
    },
    "Name": "overlay2"
  },
  "State": {
    "Pid": 0,
    "FinishedAt": "2022-11-23T11:08:35.014517474Z",
    "StartedAt": "2022-11-23T00:56:40.753336314Z",
    "Error": "",
    "Running": false,
    "Paused": false,
    "OOMKilled": false,
    "Status": "exited",
    "ExitCode": 137,
    "Restarting": false,
    "Dead": false
  },
  "Driver": "overlay2",
  "Name": "\/home-assistant",
  "Args": [
  ],
  "HostnamePath": "\/opt\/docker\/containers\/2d9be9e4dcd02bd0296763d95c99034f15d85857932ef44ef70e2a54500b0a8b\/hostname",
  "Created": "2022-11-23T00:48:07.562187405Z",
  "AppArmorProfile": "",
  "Image": "sha256:ee2cb87b59d3243f20e0233736f258f893e11a4ae0cc1c8a6b1658654ccb14ef"
}

and from the emoncms container it does not specify an arch

{
  "Path": "docker-php-entrypoint",
  "ProcessLabel": "",
  "ResolvConfPath": "\/opt\/docker\/containers\/9ea49c5a4f4338f2df368d14df6591977dc5a823c55899bab6db3638cdd3006d\/resolv.conf",
  "NetworkSettings": {
    "LinkLocalIPv6Address": "",
    "SandboxID": "981783c4f3a0dd2e1b427e15b44a13293b62c141e2aace273ee7eb5f3ac03e62",
    "HairpinMode": false,
    "Networks": {
      "host": {
        "NetworkID": "a4350309e9511c3e1d234667c898a54bc02d9bbf4029f1d76686b60978b8d07d",
        "IPAddress": "",
        "MacAddress": "",
        "IPPrefixLen": 0,
        "IPv6Gateway": "",
        "Gateway": "",
        "GlobalIPv6PrefixLen": 0,
        "EndpointID": "",
        "GlobalIPv6Address": ""
      }
    },
    "Ports": [
    ],
    "Bridge": "",
    "MacAddress": "",
    "IPv6Gateway": "",
    "IPPrefixLen": 0,
    "IPAddress": "",
    "EndpointID": "",
    "SandboxKey": "\/var\/run\/docker\/netns\/default",
    "Gateway": "",
    "GlobalIPv6PrefixLen": 0,
    "LinkLocalIPv6PrefixLen": 0,
    "GlobalIPv6Address": ""
  },
  "MountLabel": "",
  "HostsPath": "\/opt\/docker\/containers\/9ea49c5a4f4338f2df368d14df6591977dc5a823c55899bab6db3638cdd3006d\/hosts",
  "LogPath": "\/opt\/docker\/containers\/9ea49c5a4f4338f2df368d14df6591977dc5a823c55899bab6db3638cdd3006d\/9ea49c5a4f4338f2df368d14df6591977dc5a823c55899bab6db3638cdd3006d-json.log",
  "RestartCount": 508,
  "Config": {
    "AttachStdout": false,
    "AttachStdin": false,
    "AttachStderr": false,
    "Cmd": [
      "apache2-foreground"
    ],
    "Image": "openenergymonitor\/emoncms:latest",
    "Hostname": "OpenWrt",
    "ExposedPorts": {
      "80\/tcp": [
      ]
    },
    "Domainname": "",
    "StdinOnce": false,
    "Tty": false,
    "Entrypoint": [
      "docker-php-entrypoint"
    ],
    "User": "",
    "OpenStdin": false,
    "Env": [
      "TZ=America\/Winnipeg",
      "PATH=\/usr\/local\/sbin:\/usr\/local\/bin:\/usr\/sbin:\/usr\/bin:\/sbin:\/bin",
      "PHPIZE_DEPS=autoconf \t\tdpkg-dev \t\tfile \t\tg++ \t\tgcc \t\tlibc-dev \t\tmake \t\tpkg-config \t\tre2c",
      "PHP_INI_DIR=\/usr\/local\/etc\/php",
      "APACHE_CONFDIR=\/etc\/apache2",
      "APACHE_ENVVARS=\/etc\/apache2\/envvars",
      "PHP_EXTRA_BUILD_DEPS=apache2-dev",
      "PHP_EXTRA_CONFIGURE_ARGS=--with-apxs2 --disable-cgi",
      "PHP_CFLAGS=-fstack-protector-strong -fpic -fpie -O2 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64",
      "PHP_CPPFLAGS=-fstack-protector-strong -fpic -fpie -O2 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64",
      "PHP_LDFLAGS=-Wl,-O1 -pie",
      "GPG_KEYS=42670A7FE4D0441C8E4632349E4FDC074A4EF02D 5A52880781F755608BF815FC910DEB46F53EA312",
      "PHP_VERSION=7.4.21",
      "PHP_URL=https:\/\/www.php.net\/distributions\/php-7.4.21.tar.xz",
      "PHP_ASC_URL=https:\/\/www.php.net\/distributions\/php-7.4.21.tar.xz.asc",
      "PHP_SHA256=cf43384a7806241bc2ff22022619baa4abb9710f12ec1656d0173de992e32a90"
    ],
    "StopSignal": "SIGWINCH",
    "WorkingDir": "\/var\/www\/html",
    "Labels": [
    ]
  },
  "Mounts": [
    {
      "Type": "bind",
      "Source": "\/root\/emoncms",
      "Mode": "",
      "Destination": "\/config",
      "RW": true,
      "Propagation": "rprivate"
    }
  ],
  "Id": "9ea49c5a4f4338f2df368d14df6591977dc5a823c55899bab6db3638cdd3006d",
  "Platform": "linux",
  "HostConfig": {
    "CgroupParent": "",
    "MemorySwap": 0,
    "ConsoleSize": [
      0,
      0
    ],
    "IOMaximumIOps": 0,
    "KernelMemoryTCP": 0,
    "CpuPeriod": 0,
    "OomScoreAdj": 0,
    "BlkioWeight": 0,
    "CgroupnsMode": "private",
    "Privileged": false,
    "MaskedPaths": [
      "\/proc\/asound",
      "\/proc\/acpi",
      "\/proc\/kcore",
      "\/proc\/keys",
      "\/proc\/latency_stats",
      "\/proc\/timer_list",
      "\/proc\/timer_stats",
      "\/proc\/sched_debug",
      "\/proc\/scsi",
      "\/sys\/firmware"
    ],
    "CpuShares": 0,
    "NetworkMode": "host",
    "CpuQuota": 0,
    "NanoCpus": 0,
    "CpuCount": 0,
    "Isolation": "",
    "Cgroup": "",
    "ContainerIDFile": "",
    "AutoRemove": false,
    "UTSMode": "",
    "VolumeDriver": "",
    "ReadonlyPaths": [
      "\/proc\/bus",
      "\/proc\/fs",
      "\/proc\/irq",
      "\/proc\/sys",
      "\/proc\/sysrq-trigger"
    ],
    "IOMaximumBandwidth": 0,
    "CpuRealtimePeriod": 0,
    "CpuPercent": 0,
    "KernelMemory": 0,
    "Binds": [
      "\/root\/emoncms:\/config"
    ],
    "MemoryReservation": 0,
    "RestartPolicy": {
      "Name": "unless-stopped",
      "MaximumRetryCount": 0
    },
    "PublishAllPorts": false,
    "Runtime": "runc",
    "CpusetMems": "",
    "IpcMode": "private",
    "ReadonlyRootfs": false,
    "UsernsMode": "",
    "Memory": 0,
    "CpusetCpus": "",
    "ShmSize": 67108864,
    "CpuRealtimeRuntime": 0,
    "PidMode": "",
    "LogConfig": {
      "Config": [
      ],
      "Type": "json-file"
    }
  },
  "GraphDriver": {
    "Data": {
      "MergedDir": "\/opt\/docker\/overlay2\/2493dcbe4faef9233582468df7fe4be3b4eccf62dbd7c90865bdfdf9fd9c40ed\/merged",
      "WorkDir": "\/opt\/docker\/overlay2\/2493dcbe4faef9233582468df7fe4be3b4eccf62dbd7c90865bdfdf9fd9c40ed\/work",
      "UpperDir": "\/opt\/docker\/overlay2\/2493dcbe4faef9233582468df7fe4be3b4eccf62dbd7c90865bdfdf9fd9c40ed\/diff",
      "LowerDir": "\/opt\/docker\/overlay2\/2493dcbe4faef9233582468df7fe4be3b4eccf62dbd7c90865bdfdf9fd9c40ed-init\/diff:\/opt\/docker\/overlay2\/009f435f41d9544b050bff3ccbcc7ac997c78a0907e06e44525818eb1aeab210\/diff:\/opt\/docker\/overlay2\/f599f9f3d5d8add7dc6b3ec2c201757bf50e25c25657d1df54ed36a39a4b3e16\/diff:\/opt\/docker\/overlay2\/12e2d7589e988b2bf0e44ba763c1b1b9f825e8d8e1ea558eb6312256ee1b8df8\/diff:\/opt\/docker\/overlay2\/4cad95163fa5878fa53b89e5bbec7e5f66e67ffa2e75fc0e62fabb1b9cf56804\/diff:\/opt\/docker\/overlay2\/b3cfd345b13ccd1e3d4d6bc3318d4d5444edc7de21f55cc83b0045bece0a73b2\/diff:\/opt\/docker\/overlay2\/0d6749bb73d5349792ffe1bd7dd1bac7e7af5b413ad098294fc4e806cf49cbe8\/diff:\/opt\/docker\/overlay2\/f181cf229e4bcce80447ca9243f77c5e963314820cc1e64aa61c9b2cf39cc959\/diff:\/opt\/docker\/overlay2\/103d7c4e15aecb670e2378ce45640d665744ca2be3eb5e6fee2a68b039fc3c6b\/diff:\/opt\/docker\/overlay2\/e5b6343e8e35ed73e71ba27d479bded57761cbfd00f90e2ce9bedf72d3d4fc2c\/diff:\/opt\/docker\/overlay2\/a61706bbfd93ac85c4a0660dfdd4114f7943aa8dc1aee184e13f73eaae1db6db\/diff:\/opt\/docker\/overlay2\/46e333601bb504b68a6b5ea32dccdad008a548a69bf98915d8df437747dfd627\/diff:\/opt\/docker\/overlay2\/bd7f63e531c68c7cdb8da384f7a37c45ce7de5fd609fd857348145e988d7a4f3\/diff:\/opt\/docker\/overlay2\/213bf37c89866299e246634fcd4b119ccd0b1803cf25cb631ead26afa56d0f8c\/diff:\/opt\/docker\/overlay2\/a11267060d6a0bbc13bb36a7bd3e124fe95f3fc7081aafa859c8547fabab6a67\/diff:\/opt\/docker\/overlay2\/eb2794a913eeb839cb51e4f2f66b7c72f6af7dc29ccabbffcab478fa6d66bd15\/diff:\/opt\/docker\/overlay2\/fbaccc13f9bfd72d9a68f8c634d2a3b2d0206395ec35da7886c434e800ce7bfd\/diff:\/opt\/docker\/overlay2\/f552265fd9913777fedf3c678a18a0f5478a0481ed50eaa4318a185457440238\/diff:\/opt\/docker\/overlay2\/fccf08dab67cc5a3a71f7ce9764b09c472809efb69522ed3a87468e8da8a6d6a\/diff:\/opt\/docker\/overlay2\/78e937b0ad762509c3047040f39003b601a9f005c27ae992ec36d8786d406ef9\/diff:\/opt\/docker\/overlay2\/de30419f17810f5be084e3eeaa6d011c505704bbf488903588721a74a02f25a5\/diff:\/opt\/docker\/overlay2\/a6b4ab51c6d16c36cbac74a4c49379cc42863d8aac7897117b544361ecdd1b7c\/diff:\/opt\/docker\/overlay2\/0dcfebe6d776f1b777eecfa8e7357a32f35b53598048da3871605a75c5767aac\/diff:\/opt\/docker\/overlay2\/47916d0f515e0c58456ccf4cf74705c35c7b7143d49da9ac4fd30f6213efeb0f\/diff:\/opt\/docker\/overlay2\/cd0a3ad9a9f2a56ca6d7a4caf737ea2f3a9fb56a47b6121617be16415f7f07aa\/diff:\/opt\/docker\/overlay2\/d1af4a2f1d470f3107ab972f85ceaaee5071b9cc6797472f9b7196612e494741\/diff:\/opt\/docker\/overlay2\/b5319aeda8afd06e0873455d8cac0e1c559886ab041fd6d0654bc2f65f75d498\/diff:\/opt\/docker\/overlay2\/2bcca864ded9037d409ac5812a9a86f92727ef7dbe4bb59d9b6b23cd41b2eb61\/diff:\/opt\/docker\/overlay2\/9e9706351871967f4361f9c17103db4b4d804b3463c92fd1cbbc73194a29673f\/diff:\/opt\/docker\/overlay2\/2c7bc14099384245acfd1bfeeeec8183247cba444dd89cce38ef50793a8b4691\/diff:\/opt\/docker\/overlay2\/2dc7074ffce22dcbb072ee07b645bc745f7f9cb40fcddaee15636bf2aa04a1c6\/diff:\/opt\/docker\/overlay2\/3dded4646e11a4b314fc532449989a3b4c9a7d7e2828441d9483b5ad9f5af7ee\/diff:\/opt\/docker\/overlay2\/3d5fffc702b8a6bc3c374f7a0c9b834f8e8f64b7f11fa7821893aad2bdd6d5fe\/diff:\/opt\/docker\/overlay2\/f85de47ee293645240ba544479b2f800ae0c4e70745ed647e97532d083a33f61\/diff:\/opt\/docker\/overlay2\/ce7c2b94602531cb8331e0756d6bd6c514f59dd32dc803a431708add13f6e17a\/diff:\/opt\/docker\/overlay2\/0836adaaea4ca7d85f5212c8c8e8880acba6fbf28c65ca54a309cbd03ea4071c\/diff:\/opt\/docker\/overlay2\/f5541d9bad3847ee042f6a9261323939c938a09bfb54a31a9ae45b8b99a11ca0\/diff:\/opt\/docker\/overlay2\/1aa663b01a71a681be046428b43a9794b1c28fa1b32cedfa272bccb572f6546a\/diff"
    },
    "Name": "overlay2"
  },
  "State": {
    "Pid": 0,
    "FinishedAt": "2022-11-23T11:25:37.650658245Z",
    "StartedAt": "2022-11-23T11:25:36.56867716Z",
    "Error": "",
    "Running": true,
    "Paused": false,
    "OOMKilled": false,
    "Status": "restarting",
    "ExitCode": 1,
    "Restarting": true,
    "Dead": false
  },
  "Driver": "overlay2",
  "Name": "\/emoncms",
  "Args": [
    "apache2-foreground"
  ],
  "HostnamePath": "\/opt\/docker\/containers\/9ea49c5a4f4338f2df368d14df6591977dc5a823c55899bab6db3638cdd3006d\/hostname",
  "Created": "2022-11-23T01:53:53.007731323Z",
  "AppArmorProfile": "",
  "Image": "sha256:b9c531103e2c8e1c2ba60bc2123fb624fdd70dfc634fefb3e31a97bd1b214f9d"

home assistant is using – “io.hass.arch”: “armv7”,

while emoncms specifies no platform difference and when you visit docker hub tags it only list linux/amd64

the solution to the problem is simple apparently on @glyn.hudson side .

it seams that to build a multiarch just needs to be specified

Docker – 30 Apr 20

Multi-arch build and images, the simple way - Docker

ild once, deploy anywhere” is really nice on the paper but if you want to use ARM targets to reduce your bill, such as Raspberry Pis and AWS A1 instances, or even keep using your old i386 servers, deploying everywhere can become a tricky problem as...

GitHub

GitHub - docker/buildx: Docker CLI plugin for extended build capabilities...

Docker CLI plugin for extended build capabilities with BuildKit - GitHub - docker/buildx: Docker CLI plugin for extended build capabilities with BuildKit

`docker buildx build \ --push \ --platform linux/arm/v7,linux/arm64/v8,linux/amd64 \ --tag your-username/multiarch-example:buildx-latest .`*emphasized text*

stephen · 2022-11-23T12:15:36.654Z

perhaps if @glyn.hudson does up load different archs he could follow home assistants build policy that way people can load to different architectures easily and be able to interface with home assistant if they want

Screenshot_20221123_0610281266×285 27.8 KB

borpin · 2022-11-23T12:28:26.325Z

I don’t think there is any intention to support Docker installs.

stephen · 2022-11-23T14:33:57.537Z

to bad , if true, they do have a fairly big download base as a docker base over million pulls … no worries maybe if I feel energetic maybe I will build a docker container for oem. I just have to figure out how. giving opensource router bases out there that run across 1000’s of different devices and the newer multi core risc-v 8 core 2 ghz opensource router bases that starting to appear

Bramco · 2023-01-31T15:25:42.707Z

Just been looking to see if the docker version was still OK - as Stephen noted it isn’t.

BUT!!! It’s still on the Docker website with instructions - which don’t work.

It might be an idea to have it removed from the hub, so don’t think Emoncms is a crock of…

Simon

stephen · 2023-01-31T16:26:51.942Z

if you want to try the one I made a couple months ago though i do not use emoncms. it seams to work and does not crash you have to create a maria database for it locally outside the docker
https://hub.docker.com/r/sash999/emoncms_localdb/tags
just follow the same directions as it is in openwrt

Emoncms docker container that works with local database (for openwrt and other) Emoncms

hi there - I compiled some emoncms container that use local database . this way it can be used on more platforms architectures as the original emoncms-docker only works with amd64 ( as that what docker maridb container limited it too) https://hub.docker.com/r/sash999/emoncms_localdb/tags with amd64,arm64,mips64, arm7, arm6 and i386 if using on openwrt here a quick howto download firmware for your device – Index of /releases/22.03.2/targets/ I use opensouce router base- BPI- R1, BPi-R2v1,…

Bramco · 2023-01-31T16:55:58.274Z

Thanks Stephen, I think I’ve about exhausted my patience with Docker, so I’ll keep plugging away with the emoncms scripts.

Simon

borpin · 2023-01-31T17:58:02.131Z

Bramco:

It might be an idea to have it removed from the hub

@glyn.hudson did you do this originally?

Bramco:

I think I’ve about exhausted my patience with Docker

I’m with you on that.

Bramco:

’ll keep plugging away with the emoncms scripts.

Is that an issue for you? I’m pushing a few updates to tidy things up so if there is an issue, let me know (GitHub or new thread). I used them recently to create a new LXC container and all was fine.

stephen · 2023-01-31T18:12:22.691Z

no worries . i moved away from docker myself and now use basic chroot. I find it better, simpler lighter and more compatible for what I do…

borpin · 2023-01-31T18:40:00.914Z

A post was split to a new topic: Issues with EmonScipts

Bramco · 2023-01-31T18:29:26.708Z

stephen:

i moved away from docker myself and now use basic chroot

You’ve just added another level of ignorance I didn’t know I had!!! Sounds like another rabbit hole…

I’m hoping that basic isn’t Basic as we learnt along time ago. Not sure I can go back to line numbers and GoTos

Simon

stephen · 2023-01-31T19:20:15.992Z

well chroot, not basic. it allow you to install another linux os software layers on top of another one of any flavour even incompatible software version ie: in my case openwrt host but running debian software on top of it . if you mess up, simply delete the chroot folder and start again . does not interfere with your other os. you are able to run the two different flavours software as if was part of the same system… also unlike docker, it only runs when ever you call on the software and nothing is loaded into memory until then and then the only thing loaded into memory is the software itself (ie say I run VLC or mplayer which openwrt does not support to play internet radio stations ( part of my AI function ) … it can have easy connection to your /dev folder and have direct access to all your devices or even folders but general it does not, it fully independent of the host computer . you can easily rebuild the chroot in 5 minutes . as currently, my openwrt router is now also AI and whisper ASR speech to text server and translator ( i really squish alot into my little 5w openwrt routers might have to start looking for a openwrt router that has CUDA GPU lol so I can get speech to text translations down to a second or less instead of the current 10 seconds ) basically it how all android phones run the os under neath and chroot for the user interface on top- that is what jailbreaking about on android phones breaking out of chroot to get to the OS underneath

Bill.Thomson · 2023-02-01T00:45:15.792Z

A bit more info on chroot:

linux.die.net

chroot(1) - Linux man page

Run COMMAND with root directory set to NEWROOT. --userspec=USER:GROUP specify user and group (ID or name) to use --groups=G_LIST specify supplementary ...

Bramco · 2023-02-01T16:01:07.019Z

Thanks @stephen and @Bill.Thomson but I’ll give chroot a miss - got enough on just setting everything up in the new house, without having to wrestle with something new.

Simon

stephen · 2023-02-01T16:17:00.319Z

no worries - good luck in the new house
heck if you or someone feel energetic one day here’s a basic setup for chroot that installs vlc, git, vim, nano, curl and build essentials

#!/bin/sh
## your build directory
THIS_CHROOT="/root/bullseye"

#chroot is not there, build it  change the arch to match yours ie armh amd64 arm64 etc....
if [ ! -d "$THIS_CHROOT" ]; then
  debootstrap --arch amd64 bullseye "$THIS_CHROOT"

  chroot "$THIS_CHROOT" /bin/bash -c "apt install -y curl  build-essential git vim nano vlc"
fi


chroot "$THIS_CHROOT" /bin/bash -c "mount -t proc proc /proc && \
mount -t sysfs sys /sys && \
apt-get install -y vlc "

there use to be a Debian build script for emoncms, but I can not find it. I would’ve adjusted the above for you to build if you wanted chroot to have direct access to your /dev directory.

mount -o bind /dev /chroot_build_dir/dev

similar if you want access to local, you could link a directory in local.rc
you initialize it with:

chroot /root/your-build_dir bash /root/run.sh

then inside your_build_dir you have something like this

#!/bin/bash

function cleanup {
	echo "Inside: cleaning up 🧹"
	umount /proc
	umount /sys
}
trap cleanup EXIT INT

mount -t proc proc /proc
mount -t sysfs sys /sys

execute some_prorgam/sevices  || exit 1


exit 0

or even simpler if it’s just a program

chroot /your_build_dir  /bin/bash  the_program

TrystanLea · 2023-04-05T18:54:33.552Z

Hello @stephen just a quick note to say that the emoncms docker has now been updated. There’s more information in the release here: https://github.com/emoncms/emoncms-docker/releases/tag/11.3.17. Not sure if it helps with the trouble that you had above, but might be useful.

stephen · 2023-04-06T00:00:08.450Z

thank you for the reply, it does not support my architecture unfortunately only supports amd64… do you have a basic debian install script - I could install using chroot or directly on my various architectures that i use

TrystanLea · 2023-04-06T08:55:46.417Z

stephen:

do you have a basic debian install script - I could install using chroot or directly on my various architectures that i use

only the EmonScripts install, which is very unlikely to be compatible I guess… ? GitHub - openenergymonitor/EmonScripts: Emoncms Stack Installation and Update scripts