# Easy EmonCMS docker install? **URL:** \ **Category:** Installation\ **Created:** [10 October 2021 15:46 UTC](https://community.openenergymonitor.org/t/easy-emoncms-docker-install/18766 "2021-10-10T15:46:40Z")\ **Posts on this page:** 1\ **Showing post:** 2
**Author:** ![MyForest](https://community.openenergymonitor.org/user_avatar/community.openenergymonitor.org/myforest/32/16336_2.png) [@MyForest](https://community.openenergymonitor.org/u/MyForest)\ **Post date:** [12 October 2021 09:41 UTC](https://community.openenergymonitor.org/t/easy-emoncms-docker-install/18766/2 "2021-10-12T09:41:30Z")
Hi @myozone - welcome to EmonCMS, nice to have you around. Quite a few of us are using openenergymonitor/emoncms: [https://hub.docker.com/r/openenergymonitor/emoncms](https://hub.docker.com/r/openenergymonitor/emoncms) and we’ve been chatting about various things in this topic: > [@Emoncms Docker...run Emoncms on your machine in 4 commands!](https://community.openenergymonitor.org/t/emoncms-docker-run-emoncms-on-your-machine-in-4-commands/823/): > > With the help of @davehun and @spikeheap from @northwalestech I have been working on an Emoncms Docker setup. Using Docker it’s possible to fire up Emoncms on a bare system (assuming Docker is installed) in a couple of minutes with all the LAMP config faff taken care of. This is great for development since you can play about with Emoncms running in a Docker container without fear of messing up your main Emoncms install. In the future, Docker can even be used as a deployment tool for Emoncms. I… Were those the install instructions you were following? If so, what tripped you up? It might be best to respond in that other thread if you’d like to chat about using the Docker setup because then people looking for Docker info will learn from your experience. Thanks --- _[View the full topic](https://community.openenergymonitor.org/t/easy-emoncms-docker-install/18766)._