# diyBMS 4 - How to change network my BMS is connected to?

**URL:** <https://community.openenergymonitor.org/t/diybms-4-how-to-change-network-my-bms-is-connected-to/15587>\
**Category:** diyBMS\
**Tags:** bms, battery\
**Created:** [4 October 2020 16:00 UTC](https://community.openenergymonitor.org/t/diybms-4-how-to-change-network-my-bms-is-connected-to/15587 "2020-10-04T16:00:52Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![acollins22](https://community.openenergymonitor.org/letter_avatar_proxy/v4/letter/a/bbce88/32.png) [@acollins22](https://community.openenergymonitor.org/u/acollins22)\
**Post date:** [4 October 2020 16:00 UTC](https://community.openenergymonitor.org/t/diybms-4-how-to-change-network-my-bms-is-connected-to/15587/1 "2020-10-04T16:00:52Z")

</div>

Hi,  
I have setup diyBMS on my bench and connected to the house wifi. Now I want to move it to its final destination and need to change the network.

I’ve looked through its web page but can’t find anything. How do I do that?

Thanks,

Andy.

---

<div class="post-metadata">

**Author:** ![MasterCATZ](https://community.openenergymonitor.org/letter_avatar_proxy/v4/letter/m/7bcc69/32.png) [@MasterCATZ](https://community.openenergymonitor.org/u/MasterCATZ)\
**Post date:** [11 October 2020 00:02 UTC](https://community.openenergymonitor.org/t/diybms-4-how-to-change-network-my-bms-is-connected-to/15587/2 "2020-10-11T00:02:24Z")

</div>

I also wish the webui had this change option as well ,  
I have been Erasing then re-flashing mine

would be nice if it had Standalone AP mode option and not need to connect to a 3rd party wifi , I had to run a cat5 cable 50m and put in a wifi router in the garden shed where batteries live

---

<div class="post-metadata">

**Author:** ![Francesc\_Vilches](https://community.openenergymonitor.org/user_avatar/community.openenergymonitor.org/francesc_vilches/32/9673_2.png) [@Francesc\_Vilches](https://community.openenergymonitor.org/u/Francesc_Vilches)\
**Post date:** [9 August 2021 14:01 UTC](https://community.openenergymonitor.org/t/diybms-4-how-to-change-network-my-bms-is-connected-to/15587/3 "2021-08-09T14:01:32Z")

</div>

Same doubt…is this question answered somewhere? 🙂

---

<div class="post-metadata">

**Author:** ![Albert](https://community.openenergymonitor.org/letter_avatar_proxy/v4/letter/a/48db29/32.png) [@Albert](https://community.openenergymonitor.org/u/Albert)\
**Post date:** [9 August 2021 20:48 UTC](https://community.openenergymonitor.org/t/diybms-4-how-to-change-network-my-bms-is-connected-to/15587/4 "2021-08-09T20:48:51Z")

</div>

It has been a while but if I remember correctly you can change the network by connecting a serial terminal.