Dashboard View with Local Emonbase Misalignment at Dashboard, Buster 10.1.11. when I am not logged in

Luiflm2 · 2019-11-17T09:27:08.033Z

Installation on Buster 10.1.11 with image and data migration from 9.9.6 ran without problems,
thank you for your tireless and excellent work.
However I have in the local Dashboard a misalignment which is unfortunately very disturbing.
Where can I adjust it?
This problem only appears on my dashboard when I am not logged in.
http://emonpibu/emoncms/user.

Buster11906×297 45.5 KB

I am logged in or in the Dashboard Layout Editor, everything is ok.
http://emonpibu/dashboard/view/001

BusterLogin1905×273 91.5 KB

Can the menu line also be reduced? Where do I have to change this?
The background is that my dashboard was completely visible on the browser without scrolling,
this is no longer the case.

jessy1900×251 92.1 KB

Server Information

Services

emonhub :- Active Running
emoncms_mqtt :- Active Running
feedwriter :- Active Running - sleep 300s 126 feed points pending write
service-runner :- Active Running
emonPiLCD :- Inactive Dead
redis-server :- Active Running
mosquitto :- Active Running
demandshaper :- Active Running

Emoncms

Version :- low-write 10.1.11
Modules :- Administration | App v2.0.9 | Backup v2.1.7 | EmonHub Config v2.0.4 | Dashboard v2.0.5 | DemandShaper v1.1.0 | Device v2.0.3 | EventProcesses | Feed | Graph v2.0.6 | Input | Postprocess v2.1.2 | CoreProcess | Schedule | Network Setup v1.0.0 | sync | Time | User | Visualisation | WiFi v2.0.2
Git :-
- URL :- GitHub - emoncms/emoncms: Web-app for processing, logging and visualising energy, temperature and other environmental data
- Branch :- * stable
- Describe :- 10.1.11

Server

OS :- Linux 4.19.83-v7+
Host :- emonpibu | emonpibu | (10.255.255.26)
Date :- 2019-11-17 10:11:24 CET
Uptime :- 10:11:25 up 51 min, 0 users, load average: 0.48, 0.56, 0.39

Memory

RAM :- Used: 27.26%
- Total :- 975.61 MB
- Used :- 265.99 MB
- Free :- 709.62 MB
Swap :- Used: 0.00%
- Total :- 100 MB
- Used :- 0 B
- Free :- 100 MB
  Write Load Period

Disk

/ :- Used: 31.36%
- Total :- 7.86 GB
- Used :- 2.46 GB
- Free :- 5.03 GB
- Write Load :- n/a
/var/opt/emoncms :- Used: 9.71%
- Total :- 21.11 GB
- Used :- 2.05 GB
- Free :- 17.99 GB
- Write Load :- n/a
/boot :- Used: 20.65%
- Total :- 252.05 MB
- Used :- 52.05 MB
- Free :- 200 MB
- Write Load :- n/a
/var/log :- Used: 4.59%
- Total :- 50 MB
- Used :- 2.3 MB
- Free :- 47.7 MB
- Write Load :- n/a

HTTP

Server :- Apache/2.4.38 (Raspbian) HTTP/1.1 CGI/1.1 80

MySQL

Version :- 5.5.5-10.3.17-MariaDB-0+deb10u1
Host :- localhost:6379 (127.0.0.1)
Date :- 2019-11-17 10:11:24 (UTC 01:00‌)
Stats :- Uptime: 127105 Threads: 17 Questions: 3496 Slow queries: 0 Opens: 80 Flush tables: 1 Open tables: 74 Queries per second avg: 0.027

Redis

Version :-
- Redis Server :- 5.0.3
- PHP Redis :- 5.0.2
Host :- localhost:6379
Size :- 521 keys (970.88K)
Uptime :- 1 days

MQTT Server

Version :- Mosquitto 1.5.7
Host :- localhost:1883 (127.0.0.1)

PHP

Version :- 7.3.11-1~deb10u1 (Zend Version 3.3.11)
Modules :- apache2handler | calendar v7.3.11-1~deb10u1 | Core v7.3.11-1~deb10u1 | ctype v7.3.11-1~deb10u1 | curl v7.3.11-1~deb10u1 | date v7.3.11-1~deb10u1 | dom v20031129 | exif v7.3.11-1~deb10u1 | fileinfo v7.3.11-1~deb10u1 | filter v7.3.11-1~deb10u1 | ftp v7.3.11-1~deb10u1 | gd v7.3.11-1~deb10u1 | gettext v7.3.11-1~deb10u1 | hash v7.3.11-1~deb10u1 | iconv v7.3.11-1~deb10u1 | json v1.7.0 | libxml v7.3.11-1~deb10u1 | mbstring v7.3.11-1~deb10u1 | mosquitto v0.4.0 | mysqli v7.3.11-1~deb10u1 | mysqlnd vmysqlnd 5.0.12-dev - 20150407 - $Id: 7cc7cc96e675f6d72e5cf0f267f48e167c2abb23 $ | openssl v7.3.11-1~deb10u1 | pcre v7.3.11-1~deb10u1 | PDO v7.3.11-1~deb10u1 | pdo_mysql v7.3.11-1~deb10u1 | Phar v7.3.11-1~deb10u1 | posix v7.3.11-1~deb10u1 | readline v7.3.11-1~deb10u1 | redis v5.0.2 | Reflection v7.3.11-1~deb10u1 | session v7.3.11-1~deb10u1 | shmop v7.3.11-1~deb10u1 | SimpleXML v7.3.11-1~deb10u1 | sockets v7.3.11-1~deb10u1 | sodium v7.3.11-1~deb10u1 | SPL v7.3.11-1~deb10u1 | standard v7.3.11-1~deb10u1 | sysvmsg v7.3.11-1~deb10u1 | sysvsem v7.3.11-1~deb10u1 | sysvshm v7.3.11-1~deb10u1 | tokenizer v7.3.11-1~deb10u1 | wddx v7.3.11-1~deb10u1 | xml v7.3.11-1~deb10u1 | xmlreader v7.3.11-1~deb10u1 | xmlwriter v7.3.11-1~deb10u1 | xsl v7.3.11-1~deb10u1 | Zend OPcache v7.3.11-1~deb10u1 | zlib v7.3.11-1~deb10u1

Pi

Model :- Raspberry Pi 3 Model B Rev 1.2 - 1GB (Sony UK)
Serial num. :- 98B6168C
Temperature :- 44.01°C - 45.1°C
emonpiRelease :- emonSD-17Oct19
File-system :- read-write

Client Information

HTTP

Browser :- Mozilla/5.0 (Windows NT 6.1; Win64; x64; rv:70.0) Gecko/20100101 Firefox/70.0
Language :- de,en-US;q=0.7,en;q=0.3

Window

Size :- 1903 x 939

Screen

Resolution :- 1920 x 1080

TrystanLea · 2019-11-17T10:05:09.966Z

Hello @Luiflm2

I cant seem to replicate this here, I’ve created a public dashboard with a grey box right up to the top and left edges and then a white box just offset and a dial, seems to work fine in the different dashboard view modes:

image780×581 11.5 KB

Could you try to see if the space appears creating a test dashboard in the same way? If you can describe the steps I need to take to replicate the issue that would be great.

You could try changing the top bar height with a custom modification to this line here: https://github.com/emoncms/emoncms/blob/master/Lib/misc/sidebar.css#L63 but it will block the emonpi update mechanism if there are future updates to this file…

Luiflm2 · 2019-11-17T11:08:32.012Z

I created a new dashboard, unfortunately still the same, but
When I call up the dashboard, the error message is flashed for a very short time:
„Notice. A non well formed numerc value encouted in var/www/emoncms/Lib/misc/nav_functions.php on Line 366“

0121143×794 9.92 KB

012e1919×721 37.6 KB

borpin · 2019-11-17T16:55:29.505Z

Have you cleared browser cache and tried it in a private window?

Luiflm2 · 2019-11-17T20:29:49.912Z

@borpin
Clearing browser cache and Private Windows did not bring any success.
@TrystanLea
An update to 10.1.13 didn’t bring any success either.
I am grateful for every idea

borpin · 2019-11-17T20:35:47.125Z

Luiflm2:

I am grateful for every idea

Have you tried different browsers?

borpin · 2019-11-17T20:39:17.582Z

For me,

Logged out…

image746×105 7.18 KB

Logged in

image750×93 5.43 KB

Look pretty much the same.

Chrome browser.

TrystanLea · 2019-11-17T21:31:04.666Z

Luiflm2:

Notice. A non well formed numerc value encouted in var/www/emoncms/Lib/misc/nav_functions.php on Line 366“

This error suggests an error caused by a module menu file, do you have any modules installed that may not have updated? What do you see under the /var/www/emoncms/Modules directory?

@emrys any ideas how to better catch this error with the navigation?

borpin · 2019-11-17T22:36:26.611Z

TrystanLea:

This error suggests an error caused by a module menu file

@TrystanLea. @Luiflm2 posted a config output above and the modules all look up to date to me.

Luiflm2:

Modules :- Administration | App v2.0.9 | Backup v2.1.7 | EmonHub Config v2.0.4 | Dashboard v2.0.5 | DemandShaper v1.1.0 | Device v2.0.3 | EventProcesses | Feed | Graph v2.0.6 | Input | Postprocess v2.1.2 | CoreProcess | Schedule | Network Setup v1.0.0 | sync | Time | User | Visualisation | WiFi v2.0.2

@Luiflm2, could you run an update and post the update log please.

Luiflm2 · 2019-11-18T16:25:23.388Z

@borpin, I used different browsers, all with the same problem.
@TrystanLea, i checked the /var/www/emoncms/Modules directory, couldn’t detect any differences to the GitHub
@borpin, here the update log

LAST ENTRIES ON THE LOG FILE

Starting update via service-runner-update.sh (v3.0) >
- emonSD version: emonSD-17Oct19
emonSD base image check passed...continue update
git pull /opt/openenergymonitor/EmonScripts
master
* stable
On branch stable
Your branch is up to date with 'origin/stable'.

nothing to commit, working tree clean
Already up to date.
-------------------------------------------------------------
Main Update Script
-------------------------------------------------------------
Date: Mon 18 Nov 16:54:48 CET 2019
EUID: 1000
openenergymonitor_dir: /opt/openenergymonitor
type: all
firmware: none
Hardware detected: rfm2pi
git pull /opt/openenergymonitor/emonpi
* master
On branch master
Your branch is up to date with 'origin/master'.

nothing to commit, working tree clean
Fetching origin
Already up to date.
git pull /opt/openenergymonitor/RFM2Pi
* master
On branch master
Your branch is up to date with 'origin/master'.

nothing to commit, working tree clean
Fetching origin
Already up to date.
Start emonhub update script:
-------------------------------------------------------------
emonHub update
-------------------------------------------------------------
git pull /opt/openenergymonitor/emonhub
* emon-pi
On branch emon-pi
Your branch is up to date with 'origin/emon-pi'.

nothing to commit, working tree clean
Already up to date.
Failed to restart .service.service: Unit .service.service not found.
- Service
Running emonhub automatic node addition script
[[2]]
Node 2 already present
[[3]]
Node 3 already present
[[4]]
Node 4 already present
[[5]]
Node 5 already present
[[6]]
Node 6 already present
[[7]]
Node 7 already present
[[8]]
Node 8 already present
[[9]]
Node 9 already present
[[10]]
Node 10 already present
[[11]]
Node 11 already present
[[12]]
Node 12 already present
[[13]]
Node 13 already present
[[14]]
Node 14 already present
[[15]]
Node 15 already present
[[16]]
Node 16 already present
[[17]]
Node 17 already present
[[18]]
Node 18 already present
[[19]]
Node 19 already present
[[20]]
Node 20 already present
[[21]]
Node 21 already present
[[22]]
Node 22 already present
[[23]]
Node 23 already present
[[24]]
Node 24 already present
[[25]]
Node 25 already present
[[26]]
Node 26 already present
[[27]]
Node 27 already present
[[28]]
Node 28 already present
[[29]]
Node 29 already present

Start emoncms update:
-------------------------------------------------------------
Update Emoncms Core
-------------------------------------------------------------

Checking status of /var/www/emoncms git repository
- git branch: stable
- no local changes
- running: git pull origin stable

Fetching origin
From https://github.com/emoncms/emoncms
* branch stable -> FETCH_HEAD
Already up to date.

Update Emoncms database
[]

-------------------------------------------------------------
Update Emoncms Services
-------------------------------------------------------------
emoncms_mqtt.service already installed
feedwriter.service already installed
service-runner.service already installed

Reloading systemctl deamon
Restarting Services...
- sudo systemctl restart feedwriter.service
--- ActiveState=active ---
- sudo systemctl restart emoncms_mqtt.service
--- ActiveState=active ---
- sudo systemctl restart emonhub.service
--- ActiveState=active ---
/opt/openenergymonitor/EmonScripts/sudoers.d/emoncms-rebootbutton: parsed OK
emonPi emoncms admin reboot button sudoers updated

-------------------------------------------------------------
Update Emoncms Modules
-------------------------------------------------------------
------------------------------------------
Updating /var/www/emoncms/Modules/app module
------------------------------------------
- git branch: stable
- git tags: 2.0.1-82-g48fb43b
- no local changes
- running: git pull origin stable

Fetching origin
Already on 'stable'
Your branch is up to date with 'origin/stable'.
Already up to date.

------------------------------------------
Updating /var/www/emoncms/Modules/config module
------------------------------------------
- git branch: stable
- git tags: 2.0.2-9-g1bba25a
- no local changes
- running: git pull origin stable

Fetching origin
Already on 'stable'
Your branch is up to date with 'origin/stable'.
Already up to date.

------------------------------------------
Updating /var/www/emoncms/Modules/dashboard module
------------------------------------------
- git branch: stable
- git tags: 2.0.3-41-g3c20c5b
- no local changes
- running: git pull origin stable

Fetching origin
Already on 'stable'
Your branch is up to date with 'origin/stable'.
Already up to date.

------------------------------------------
Updating /var/www/emoncms/Modules/device module
------------------------------------------
- git branch: stable
- git tags: 2.0.0-22-g46654e9
- no local changes
- running: git pull origin stable

Fetching origin
Already on 'stable'
Your branch is up to date with 'origin/stable'.
Already up to date.

------------------------------------------
Updating /var/www/emoncms/Modules/graph module
------------------------------------------
- git branch: stable
- git tags: 2.0.1-61-gd5ecfbe
- no local changes
- running: git pull origin stable

Fetching origin
Already on 'stable'
Your branch is up to date with 'origin/stable'.
Already up to date.

------------------------------------------
Updating /var/www/emoncms/Modules/setup module
------------------------------------------
- git branch: stable
fatal: No names found, cannot describe anything.
- git tags:
- no local changes
- running: git pull origin stable

Fetching origin
Already on 'stable'
Your branch is up to date with 'origin/stable'.
Already up to date.

------------------------------------------
Updating /var/www/emoncms/Modules/wifi module
------------------------------------------
- git branch: stable
- git tags: 2.0.0-29-g274bcd5
- no local changes
- running: git pull origin stable

Fetching origin
Already on 'stable'
Your branch is up to date with 'origin/stable'.
Already up to date.

/opt/openenergymonitor/EmonScripts/sudoers.d/wifi-sudoers: parsed OK
wifi sudoers entry updated
------------------------------------------
Updating /opt/emoncms/modules/backup module
------------------------------------------
- git branch: stable
- git tags: 2.0.0-39-g81b5912
- no local changes
- running: git pull origin stable

Already up to date.
Already on 'stable'
Your branch is up to date with 'origin/stable'.

------------------------------------------
Updating /opt/emoncms/modules/demandshaper module
------------------------------------------
- git branch: stable
- git tags: 1.1-30-g42749d9
- no local changes
- running: git pull origin stable

Already up to date.
Already on 'stable'
Your branch is up to date with 'origin/stable'.

------------------------------------------
Updating /opt/emoncms/modules/postprocess module
------------------------------------------
- git branch: stable
- git tags: 2.1.0-20-ga9b1516
- no local changes
- running: git pull origin stable

Already up to date.
Already on 'stable'
Your branch is up to date with 'origin/stable'.

------------------------------------------
Updating /opt/emoncms/modules/sync module
------------------------------------------
- git branch: stable
- git tags: 2.0.1-15-g39361e4
- no local changes
- running: git pull origin stable

Already up to date.
Already on 'stable'
Your branch is up to date with 'origin/stable'.

------------------------------------------
Updating /opt/emoncms/modules/usefulscripts module
------------------------------------------
- git branch: stable
fatal: No names found, cannot describe anything.
- git tags:
- no local changes
- running: git pull origin stable

Already up to date.
Already on 'stable'
Your branch is up to date with 'origin/stable'.

Update Emoncms database
[]

-------------------------------------------------------------
emonPi update done: Mon 18 Nov 16:55:16 CET 2019
-------------------------------------------------------------
restarting service-runner

Server Information

Services

emonhub :- Active Running
emoncms_mqtt :- Active Running
feedwriter :- Active Running - sleep 300s 128 feed points pending write
service-runner :- Active Running
emonPiLCD :- Inactive Dead
redis-server :- Active Running
mosquitto :- Active Running
demandshaper :- Active Running

Emoncms

Version :- low-write 10.1.13
Modules :- Administration | App v2.0.9 | Backup v2.1.7 | EmonHub Config v2.0.4 | Dashboard v2.0.5 | DemandShaper v1.1.0 | Device v2.0.3 | EventProcesses | Feed | Graph v2.0.6 | Input | Postprocess v2.1.2 | CoreProcess | Schedule | Network Setup v1.0.0 | sync | Time | User | Visualisation | WiFi v2.0.2
Git :-
- URL :- GitHub - emoncms/emoncms: Web-app for processing, logging and visualising energy, temperature and other environmental data
- Branch :- * stable
- Describe :- 10.1.11-7-g90f39158

Server

OS :- Linux 4.19.83-v7+
Host :- emonpibu | emonpibu | (10.255.255.26)
Date :- 2019-11-18 17:01:35 CET
Uptime :- 17:01:35 up 32 min, 1 user, load average: 0.11, 0.13, 0.16

Memory

RAM :- Used: 28.70%
- Total :- 975.61 MB
- Used :- 280.02 MB
- Free :- 695.59 MB
Swap :- Used: 0.00%
- Total :- 100 MB
- Used :- 0 B
- Free :- 100 MB
  Write Load Period

Disk

/ :- Used: 32.10%
- Total :- 7.86 GB
- Used :- 2.52 GB
- Free :- 4.97 GB
- Write Load :- 2.5 KB/s (8 mins)
/var/opt/emoncms :- Used: 9.73%
- Total :- 21.11 GB
- Used :- 2.05 GB
- Free :- 17.98 GB
- Write Load :- 584.28 B/s (8 mins)
/boot :- Used: 20.65%
- Total :- 252.05 MB
- Used :- 52.05 MB
- Free :- 200 MB
- Write Load :- 0 B/s (8 mins)
/var/log :- Used: 4.41%
- Total :- 50 MB
- Used :- 2.2 MB
- Free :- 47.8 MB
- Write Load :- n/a

HTTP

Server :- Apache/2.4.38 (Raspbian) HTTP/1.1 CGI/1.1 80

MySQL

Version :- 5.5.5-10.3.17-MariaDB-0+deb10u1
Host :- localhost:6379 (127.0.0.1)
Date :- 2019-11-18 17:01:34 (UTC 01:00‌)
Stats :- Uptime: 69924 Threads: 16 Questions: 1879 Slow queries: 0 Opens: 80 Flush tables: 1 Open tables: 74 Queries per second avg: 0.026

Redis

Version :-
- Redis Server :- 5.0.3
- PHP Redis :- 5.0.2
Host :- localhost:6379
Size :- 523 keys (851.51K)
Uptime :- 0 days

MQTT Server

Version :- Mosquitto 1.5.7
Host :- localhost:1883 (127.0.0.1)

PHP

Version :- 7.3.11-1~deb10u1 (Zend Version 3.3.11)
Modules :- apache2handler | calendar v7.3.11-1~deb10u1 | Core v7.3.11-1~deb10u1 | ctype v7.3.11-1~deb10u1 | curl v7.3.11-1~deb10u1 | date v7.3.11-1~deb10u1 | dom v20031129 | exif v7.3.11-1~deb10u1 | fileinfo v7.3.11-1~deb10u1 | filter v7.3.11-1~deb10u1 | ftp v7.3.11-1~deb10u1 | gd v7.3.11-1~deb10u1 | gettext v7.3.11-1~deb10u1 | hash v7.3.11-1~deb10u1 | iconv v7.3.11-1~deb10u1 | json v1.7.0 | libxml v7.3.11-1~deb10u1 | mbstring v7.3.11-1~deb10u1 | mosquitto v0.4.0 | mysqli v7.3.11-1~deb10u1 | mysqlnd vmysqlnd 5.0.12-dev - 20150407 - $Id: 7cc7cc96e675f6d72e5cf0f267f48e167c2abb23 $ | openssl v7.3.11-1~deb10u1 | pcre v7.3.11-1~deb10u1 | PDO v7.3.11-1~deb10u1 | pdo_mysql v7.3.11-1~deb10u1 | Phar v7.3.11-1~deb10u1 | posix v7.3.11-1~deb10u1 | readline v7.3.11-1~deb10u1 | redis v5.0.2 | Reflection v7.3.11-1~deb10u1 | session v7.3.11-1~deb10u1 | shmop v7.3.11-1~deb10u1 | SimpleXML v7.3.11-1~deb10u1 | sockets v7.3.11-1~deb10u1 | sodium v7.3.11-1~deb10u1 | SPL v7.3.11-1~deb10u1 | standard v7.3.11-1~deb10u1 | sysvmsg v7.3.11-1~deb10u1 | sysvsem v7.3.11-1~deb10u1 | sysvshm v7.3.11-1~deb10u1 | tokenizer v7.3.11-1~deb10u1 | wddx v7.3.11-1~deb10u1 | xml v7.3.11-1~deb10u1 | xmlreader v7.3.11-1~deb10u1 | xmlwriter v7.3.11-1~deb10u1 | xsl v7.3.11-1~deb10u1 | Zend OPcache v7.3.11-1~deb10u1 | zlib v7.3.11-1~deb10u1

Pi

Model :- Raspberry Pi 3 Model B Rev 1.2 - 1GB (Sony UK)
Serial num. :- 98B6168C
Temperature :- 48.31°C - 47.8°C
emonpiRelease :- emonSD-17Oct19
File-system :- read-write

Client Information

HTTP

Browser :- Mozilla/5.0 (Windows NT 6.1; Win64; x64; rv:70.0) Gecko/20100101 Firefox/70.0
Language :- de,en-US;q=0.7,en;q=0.3

Window

Size :- 1903 x 939

Screen

Resolution :- 1920 x 1080

borpin · 2019-11-18T18:51:45.025Z

Luiflm2:

here the update log

Thanks - that (as I expected) has no errors in it.

@TrystanLea or @emrys may be able to solve it.

emrys · 2019-11-19T07:01:45.227Z

I’ve created this github issue to track the problem:

github.com/emoncms/dashboard

Misalignment with public dashboard

opened 06:46AM - 19 Nov 19 UTC

closed 08:03PM - 25 Nov 19 UTC

emrysr

public dashboards can cause issues with alignment of widgets: full descriptio…n: https://community.openenergymonitor.org/t/dashboard-view-with-local-emonbase-misalignment-at-dashboard-buster-10-1-11-when-i-am-not-logged-in/12502 ![delwedd](https://user-images.githubusercontent.com/1466013/69123057-4bb9dc80-0a98-11ea-91cc-1cdae1983dc5.png)

emrys · 2019-11-19T07:02:30.485Z

This emoncms pull request should fix this issue:

github.com/emoncms/emoncms

fixed menu sort function to increment with number

emoncms:master ← emrysr:fix/issue-1475-menu-sort-functions

opened 06:56AM - 19 Nov 19 UTC

emrysr

+9 -2

fix: #1475 now uses the `asort()` `SORT_NATURAL` function to sort correctly.… also increments the number part of the sorted keys: ``` 'a'=>'First Item', 'a1'=>'Second Item' ``` previously it would have shown an error when text keys were used as it couldn't increment the array's key to the next item.

could you let me now if now this doesn’t sort your problem.

TrystanLea · 2019-11-19T14:59:12.770Z

I’ve merged @emrys fix to the master branch, could you test @Luiflm2 to confirm it works for you, these are the steps:

cd /var/www/emoncms
git checkout master
git pull

then if you want to switch back to stable after testing:

cd /var/www/emoncms
git checkout stable
git pull

Luiflm2 · 2019-11-19T15:10:04.257Z

@emrys, @TrystanLea, I just installed the update, it works.
I thank everyone for quickly solving.

TrystanLea · 2019-11-19T15:13:52.157Z

good to hear thanks @Luiflm2