# Configuring the Node-red wunderground flow **URL:** \ **Category:** Integrations\ **Tags:** wundergound\ **Created:** [23 June 2017 20:58 UTC](https://community.openenergymonitor.org/t/configuring-the-node-red-wunderground-flow/4400 "2017-06-23T20:58:44Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![wabiloo](https://community.openenergymonitor.org/user_avatar/community.openenergymonitor.org/wabiloo/32/3619_2.png) [@wabiloo](https://community.openenergymonitor.org/u/wabiloo)\ **Post date:** [23 June 2017 20:58 UTC](https://community.openenergymonitor.org/t/configuring-the-node-red-wunderground-flow/4400/1 "2017-06-23T20:58:44Z")
I’m having issues configuring (or understanding how to configure) the pre-installed wunderground flow in node-red. I’ve modified the wunderground node to pull data for my location. Through debug, I can see that works. However the MQTT node is showing as “disconnected”, and I don’t quite understand why… Also, I cannot seem to find how I can then use the data (once connected correctly). Will the data appear as a new input into EmonCMS? ---
**Author:** ![wabiloo](https://community.openenergymonitor.org/user_avatar/community.openenergymonitor.org/wabiloo/32/3619_2.png) [@wabiloo](https://community.openenergymonitor.org/u/wabiloo)\ **Post date:** [23 June 2017 21:08 UTC](https://community.openenergymonitor.org/t/configuring-the-node-red-wunderground-flow/4400/2 "2017-06-23T21:08:18Z")
Answering my own question: The password pre-set for the MQTT broker is incorrect (does not correspond to pre-configured password for MQTT) Resetting the password to the one in [Service Credentials - Guide | OpenEnergyMonitor](https://guide.openenergymonitor.org/technical/credentials/) and then deploying the flow worked! (For future use) Once that’s working correctly, a new input will appear, called “weather”, which will contain the data