# Code test

**URL:** <https://community.openenergymonitor.org/t/code-test/9821>\
**Category:** Sandpit\
**Created:** [21 January 2019 07:48 UTC](https://community.openenergymonitor.org/t/code-test/9821 "2019-01-21T07:48:29Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![albertin](https://community.openenergymonitor.org/letter_avatar_proxy/v4/letter/a/3be4f8/32.png) [@albertin](https://community.openenergymonitor.org/u/albertin)\
**Post date:** [21 January 2019 07:48 UTC](https://community.openenergymonitor.org/t/code-test/9821/1 "2019-01-21T07:48:29Z")

</div>

Code test:

```auto
/*
 EmonTx Shield 4 x CT example
 
  An example sketch for the emontx Arduino shield module for
 CT only electricity monitoring.
 
 Part of the openenergymonitor.org project
 Licence: GNU GPL V3
 
 Authors: Glyn Hudson, Trystan Lea
 Builds upon JeeLabs RF12 library and Arduino
 
 emonTx documentation: http://openenergymonitor.org/emon/modules/emontxshield/
 emonTx firmware code explination: http://openenergymonitor.org/emon/modules/emontx/firmware
 emonTx calibration instructions: http://openenergymonitor.org/emon/modules/emontx/firmware/calibration

 THIS SKETCH REQUIRES:

 Libraries in the standard arduino libraries folder:
	- JeeLib https://github.com/jcw/jeelib
	- EmonLib https://github.com/openenergymonitor/EmonLib.git

 Other files in project directory (should appear in the arduino tabs above)
	- emontx_lib.ino
 
*/

/*Recommended node ID allocation
------------------------------------------------------------------------------------------------------------
-ID-	-Node Type- 
0	- Special allocation in JeeLib RFM12 driver - reserved for OOK use
1-4 - Control nodes 
5-10	- Energy monitoring nodes
11-14	--Un-assigned --
15-16	- Base Station & logging nodes
17-30	- Environmental sensing nodes (temperature humidity etc.)
31	- Special allocation in JeeLib RFM12 driver - Node31 can communicate with nodes on any network group
-------------------------------------------------------------------------------------------------------------
*/

#define FILTERSETTLETIME 5000 // Time (ms) to allow the filters to settle before sending data

const int CT1 = 1; 
const int CT2 = 1; // Set to 0 to disable 
const int CT3 = 1;
const int CT4 = 0;

#define RF_freq RF12_433MHZ // Frequency of RF12B module can be RF12_433MHZ, RF12_868MHZ or RF12_915MHZ. You should use the one matching the module you have.
//const int nodeID = 6; // emonTx RFM12B node ID
const int nodeID = 17; // emonTx RFM12B node ID
const int networkGroup = 210; // emonTx RFM12B wireless network group - needs to be same as emonBase and emonGLCD                                                 

#define RF69_COMPAT 1 // set to 1 to use RFM69CW 
#include <JeeLib.h> // make sure V12 (latest) is used if using RFM69CW
#include "EmonLib.h"
EnergyMonitor ct1,ct2,ct3, ct4; // Create instances for each CT channel

typedef struct { int hora, power1, power2, power3, power4, TEMP1 ;} PayloadTX; // create structure - a neat way of packaging data for RF comms, nothing is added a a 5th integer to match data structure of voltage version
PayloadTX emontx;                                                       

const int LEDpin = 9; // On-board emonTx LED 
boolean settled = false;
int x;

// TEMPERATURA
#include <OneWire.h>
#include <DallasTemperature.h>
OneWire oneWire(4); // Setup one-wire on digital input pin 4
DallasTemperature sensors(&oneWire); // Pass the oneWire reference to Dallas Temperature.
DeviceAddress address_T1 = { 0x28, 0xFD, 0xBE, 0xBC, 0x07, 0x00, 0x00, 0x32 };   

}
```
