Adding the hot water tank temperature to heat pump dashboard

matthewmilne · 2024-06-04T11:42:46.868Z

Is it possible to add hot water tank temperature to heat pump dashboard, I already have it as a feed but can’t see an obvious way to add the history of the tank temperature to the same graph as the other Heat Pump data. I want to achieve a similar result as the Room Temperature or External Temperature.

Timbones · 2024-06-04T14:18:20.212Z

Tank temperature is not currently something that is shown on My Heatpump app, but it is something we could consider adding.

LeiChat · 2024-06-05T15:17:57.331Z

Could contribute to some interesting analysis, comparing external temps, DHW COPs and the tank temp range from start to end of a heating cycle.

Andre_K · 2024-06-05T15:56:43.904Z

Definitely interesting, I have this in a separate Heatpump app where I use tank temperature for the room temperature feed. Would be great to have it included; at the same time a “target tank temperature” feed should be added. It looks like this for me:

Screenshot_20240605-175337806×641 92.9 KB

LeiChat · 2024-06-05T16:05:18.698Z

I suppose one issue would be the variable sources for those additional properties. Straying further from the MID metering accuracy perhaps.

I know the PT1000 connected to our myenergi eddi reports a higher temperature than the Vaillant sensor when located in the same cylinder pocket or ambient air.

Michal_S · 2024-12-24T22:05:20.256Z

LeiChat:

se one issue would be the variable sources for those additional properties. Straying further from the MID metering accuracy perhaps.

I know the PT1000 conne

Hi Tim, is here any progress ? This would be a really useful parameter to add into a chart. Since we can have separate DHW and space heating daily splits this would be great to have this feature. Thx.