Adding IoTaWatt inputs to Emoncms server on EmonPi

dhix17 · 2018-04-13T00:08:38.281Z

I’m currently having a lot of trouble setting up IoTaWatt data inputs into my emoncms server (which is being hosted by an EmonPi). The IoTaWatt input simply doesn’t show up on emoncms. I have been able to set up emonTHs successfully. Below is the configuration I have in the IoTaWatt Web server setup:

EmonPi%20Screenshot705×816 45 KB

Please let me know what, if anything, I’m doing wrong.

pb66 · 2018-04-13T13:07:01.341Z

Hi Daniel,

@overeasy has set up an IoTaWatt specific forum at https://community.iotawatt.com/, you will probably get a speedier reply there. Knowledge and experience of the IoTaWatt is fairly limited on this forum.

dhix17 · 2018-04-13T16:05:22.487Z

dhix17:

Please let me know what, if anything, I’m doing wrong.

Thanks! I posted it in that forum.