# 1ch Relay web server unresponsive after time

**URL:** <https://community.openenergymonitor.org/t/1ch-relay-web-server-unresponsive-after-time/10374>\
**Category:** WiFi Relay\
**Created:** [11 March 2019 15:36 UTC](https://community.openenergymonitor.org/t/1ch-relay-web-server-unresponsive-after-time/10374 "2019-03-11T15:36:45Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![mickeymouse690](https://community.openenergymonitor.org/letter_avatar_proxy/v4/letter/m/3da27b/32.png) [@mickeymouse690](https://community.openenergymonitor.org/u/mickeymouse690)\
**Post date:** [11 March 2019 15:36 UTC](https://community.openenergymonitor.org/t/1ch-relay-web-server-unresponsive-after-time/10374/1 "2019-03-11T15:36:45Z")

</div>

Hi,

After a few hours, web server becomes unresponsive. I ordered a whole bunch of these and h-ave one up testing. I hope this is not generalized… Any know issues about this?

---

<div class="post-metadata">

**Author:** ![TrystanLea](https://community.openenergymonitor.org/user_avatar/community.openenergymonitor.org/trystanlea/32/31_2.png) [@TrystanLea](https://community.openenergymonitor.org/u/TrystanLea)\
**Post date:** [11 March 2019 15:50 UTC](https://community.openenergymonitor.org/t/1ch-relay-web-server-unresponsive-after-time/10374/2 "2019-03-11T15:50:47Z")

</div>

Hello @mickeymouse690 its not something we are aware of, are you using the stock firmware? @glyn.hudson would you have any ideas?

---

<div class="post-metadata">

**Author:** ![glyn.hudson](https://community.openenergymonitor.org/user_avatar/community.openenergymonitor.org/glyn.hudson/32/35003_2.png) [@glyn.hudson](https://community.openenergymonitor.org/u/glyn.hudson)\
**Post date:** [11 March 2019 16:36 UTC](https://community.openenergymonitor.org/t/1ch-relay-web-server-unresponsive-after-time/10374/3 "2019-03-11T16:36:22Z")

</div>

This is not a known issue. Please could you let us know a bit more about your setup.

1. Is the unit in Wi-Fi Access Point or is it connected to a local network
2. What page are you loading?
3. Are you refreshing the page?
4. What happens when the page becomes unresponsive? Does the drop off the Wifi?

---

<div class="post-metadata">

**Author:** ![mickeymouse690](https://community.openenergymonitor.org/letter_avatar_proxy/v4/letter/m/3da27b/32.png) [@mickeymouse690](https://community.openenergymonitor.org/u/mickeymouse690)\
**Post date:** [12 March 2019 02:59 UTC](https://community.openenergymonitor.org/t/1ch-relay-web-server-unresponsive-after-time/10374/4 "2019-03-12T02:59:57Z")

</div>

Stock firmware, its connected to local network.

It just doesnt respond at all. 404 error and doesn’t reply to pings when you try to access http. Needs a hard reboot and she comes back. Has happened 4 times in the last 24-36 hours. Been good all day but i have been checking it all day. Will recheck in the morning and update.

Thx for your replies

---

<div class="post-metadata">

**Author:** ![Cadair](https://community.openenergymonitor.org/user_avatar/community.openenergymonitor.org/cadair/32/4564_2.png) [@Cadair](https://community.openenergymonitor.org/u/Cadair)\
**Post date:** [9 January 2021 13:15 UTC](https://community.openenergymonitor.org/t/1ch-relay-web-server-unresponsive-after-time/10374/5 "2021-01-09T13:15:34Z")

</div>

I have also run into this recently. The thermostat seems to be working, and I can ping the unit but no http calls are successful. It’s connected to my LAN.