Community
OpenEnergyMonitor

Community

Topic Replies Activity
Switching from Git master back to stable 3 June 12, 2019
Emoncms v10.1.0 1 June 12, 2019
How many free pins on emonTx Shield? 2 June 12, 2019
Reset HTTP auth password on ESP8266? 3 June 12, 2019
Web interface not working after initial setup 7 June 12, 2019
Switching emonpi/emoncms logfile locations to /var/log/emoncms 15 June 12, 2019
Fully Charged Live 7th, 8th and 9th June 2019 (Silverstone, UK) 17 June 11, 2019
emonSD issues created using new scripts + emonhub environment file 121 June 11, 2019
Using continuous monitoring 1 June 11, 2019
My Octopus Agile & Go Tariff comparison / analysis website 11 June 11, 2019
Local Network Raspberry Issue 19 June 11, 2019
3 phases - 3 wires, no neutral - power computation 6 June 10, 2019
Web Based Backup Fails 14 June 10, 2019
Virtual Feed - Incorrect usages or Software processing error! 1 June 10, 2019
Custom sensor nodes 9 June 10, 2019
Pause emoncms database updates? 18 June 10, 2019
Inverting value 2 June 9, 2019
Permanent "Raspberry Pi Booting..." after failed emonPi Update 29 June 9, 2019
Data from feeds does not add up properly 5 June 9, 2019
What equipment do i need? 27 June 9, 2019
Wired as Type 1 but will set up only as Type 2 45 June 9, 2019
Some of MySolar history bargraph values don't change 1 June 9, 2019
Data missing on local emonpi, but its on emoncms.org. How to sync from emoncms.org 2 June 8, 2019
Input feeds page gone after upgrade 7 June 8, 2019
EmonPI 6 June 8, 2019
Misalignment of Display in Admin Screen 3 June 7, 2019
MQTT topic 4 June 7, 2019
New Build for Convienience Store 3 Phase 208V in USA 16 June 7, 2019
V 10.0.2 "406 Not Acceptable. Route not found" 9 June 6, 2019
10.0.2 update 1 June 6, 2019