Community
OpenEnergyMonitor

Community

Integrations


OpenHAB <strong>As of Oct 2018 OpenHAB is no longer pre-installed on the emonPi / emonBase, it can be installed following the standard OpenHAB Raspberry Pi install guide.</strong> NodeRED <strong>As of Oct 2018 NodeRED is no longer pre-installed on the emonPi / emonBase, it can be installed following the standard NodeRED Raspberry Pi install guide.</strong> OpenEVSE Discussion and development of open source electric car vehicle (EV) and charging equipment. E.g OpenEVSE: Electric Vehicle Supply Equipment)]. Focus on energy efficiency e.g smart charge controlling, open source and integration with Emoncms and other open platforms.
About the Integrations category [Integrations] (1)
Request for new input to emoncms from OpenEVSE [OpenEVSE] (2)
PVOutput Python Script (emoncms.org > PVOutput) [Integrations] (2)
Energenie Two Way Pi-mote [Integrations] (8)
Open EVSE and solar divert running alongside a hot water solar divert [OpenEVSE] (1)
OpenEVSE 3 phase [OpenEVSE] (11)
Grafana Dashboard Project ( 2 3 ) [Integrations] (50)
EmonEVSE WiFi Connected EV Charging Station: latest components? Same as kit? [OpenEVSE] (3)
A taste of things to come? - UK smart meter data access ( 2 3 ) [Integrations] (47)
OWL Intuition (Electric and Heating and Hot Water) to Emoncms (success) [Integrations] (11)
Openevse Ammeter Calibration [OpenEVSE] (1)
EVSE Charging with solar and night rate energy [OpenEVSE] (6)
Myenergi harvi [Integrations] (9)
Python code to read TP-Link HS110 [Integrations] (1)
Appliances to integrate with solarPV - and HomeConnect/EEBus? [Integrations] (4)
Help with modbus configuration for SMA TriPower [Integrations] (9)
September 18: security threat affecting node-RED (does not by default effect emonPi) [NodeRED] (13)
Upgrading NodeRED [NodeRED] (12)
Connecting to AWS IOT [Integrations] (4)
Feeding data into EMONCMS via MQTT or API, or [Integrations] (4)
Control energenie sockets [Integrations] (2)
node-RED to MQTT is disconnected [Integrations] (4)
Wrong Energy [OpenEVSE] (11)
Installing OpenHAB2 on the new EmonSD30Oct18 [OpenHAB] (7)
Installing NodeRed on emonSD-30Oct18 ( 2 ) [NodeRED] (34)
Measuring Geyser temp and controlling geyser [Integrations] (1)
New Sd install getting NODE-RED info [NodeRED] (5)
SolarEdge Node-Red node [NodeRED] (6)
Alternative means of measuring room temperature [Integrations] (4)
OpenEVSE, HTTP request and Charge Mode [OpenEVSE] (1)