Community
OpenEnergyMonitor

Community

Hardware   IoTaWatt


Topic Replies Activity
About the IoTaWatt category 1 September 25, 2017
Particle Photon with pzem004T 2 June 21, 2019
Iowatt can work without burden resistor? 3 April 28, 2019
Unsupervised appliance identification and/or Non intrusive appliance load monitoring and dissagregation 3 March 23, 2019
Optical utility meter led pulse sensor own LED does not flash 17 March 19, 2019
20A Clip on current sensor 2 February 10, 2019
A more industrial/commercial angle 18 February 5, 2019
IotaWatt 4.0 207 January 12, 2019
IoTaWatt, can it report kwh to EMON CMS? 8 January 12, 2019
IoTaWatt and emonTx Accuracy 8 January 10, 2019
IoTaWatt with SCT-013-030 - config info? 16 January 8, 2019
Two IoTaWatts 3 January 8, 2019
IoTaWatt: EmonService: get input list failing, code: -4 3 December 12, 2018
Derived voltage reference (three-phase) and utility meter accuracy comparison 10 December 5, 2018
US monitoring two pole circuits without common 3 September 13, 2018
Iotawatt 3 phase 3 August 11, 2018
Building the IoTaWatt 3 July 28, 2018
Output Graphs? 7 July 9, 2018
Is Wifi ESP8266 in IoTaWatt technically compliant in Japan? 3 June 19, 2018
IoTaWatt connecte to Wifi but can not see it or ping it 3 June 14, 2018
MQTT for IotaWatt 7 May 7, 2018
IoTaWatt three phase configuration 50 April 30, 2018
Question regarding precision of CTs (SCT006) 4 April 29, 2018
Adding Emonpi to Emoncms account 8 April 23, 2018
IoTaWatt clearances for recessed installation 2 April 4, 2018
Iotawatt - No local data after 3/13/18 3 March 18, 2018
Homebrew IoTaWatt 124 March 17, 2018
Power consumption of iotawatt 7 March 9, 2018
IoTaWatt auto-update status 13 March 4, 2018
IoTaWatt wont start 2 February 28, 2018