Community
OpenEnergyMonitor

Community

Hardware   emonTx


Topic Replies Activity
emonTx firmware version 6 December 17, 2018
Emontx to local server 5 December 15, 2018
Emonupload doesn't detect USB ports 22 December 10, 2018
EmonLibCM - Version 2 (Support) 27 December 4, 2018
EmonLibCM - Version 2.01 8 December 4, 2018
EmonTx v2 unreliable data transmission 22 December 4, 2018
EmonTx - RJ45 - Analogic/Pulse/Data? 7 November 21, 2018
Problem with Optical Pulse sensor 2 November 15, 2018
Problems with Homebrew EmonTX, EmonESP and EmonPi 4 November 10, 2018
Multiple node 200units integration 2 November 1, 2018
Can't get emonTx to enter RF config mode 27 October 31, 2018
emonTx blocked while booting 19 October 30, 2018
Switch mode supply ripple in the emonTH v2 4 October 2, 2018
3 Phase emonTX v3 firmware (Latest) 3 September 30, 2018
Energy diverter based on RS485- wemos uno+wifi R3, R2 and emontx shield 1 September 20, 2018
EmonTx and raspberry (advice needed!) 5 September 5, 2018
EmoxTx v3 Accuracy 11 September 3, 2018
Adjusting sensitivity of Optical Pulse Sensor 28 September 3, 2018
Homebrew emonTx and emonPi RF problem 19 August 28, 2018
Shield CT1234 Voltage SerialOnly.ino Example 9 August 27, 2018
EmonTx V3 Availability 4 August 24, 2018
Unusual 0W readings 3 August 16, 2018
Blasted RFM69CW 6 August 1, 2018
Uno. emonTx Shield. 3Phase. RFM69. - - - Recommended firmware? 17 July 28, 2018
EmonTx v2.4 shield to emonpi via USB 3 July 25, 2018
How to connect 3P+N and an extra appliance 4 July 16, 2018
Strange ct sensor readings from emontx v2 27 July 13, 2018
EmonTx 3.2.1 with PLL diversion stop working after upload 3 July 13, 2018
EmonTx Shield zero readings 9 July 9, 2018
Raspberry pi is not receiving data transfered from Emontx after RTC installation 2 July 5, 2018